TPSMak

TPS Motorsports 427x Short Shifter-$139 FREE SHIPPING!

TPS has done it AGAIN! TPS has acquired a nice batch of C6Z shifters without the shifter box that we're blowing out to you for only $129.99 delivered to your door!

The only thing that's different from our normal 427 shifter vs. the 427x is the 427x doesn't have a shifter box which is not needed when swapping out this shifter. You will also need to move the black pivot bushing from your old shifter to the new one.

TPS Motorsports' new short shifter is ready for your C5 or C6 Corvette! We take the great shifter from one of the greatest sports cars in the world, the C6 Z06 Corvette, and modify it to provide a shorter throw than your stock shifter. Unlike aftermarket shifters, the TPS 427 Shifter retains the nice smooth shifting action of the Z06 Shifter while reducing the length of the shift throws about 20%. The TPS 427 Shifter makes shifting more precise and generally makes driving your Corvette that much more enjoyable. Just add the shift **** of your choice and your ready to go! Shifter takes any shift **** with a 9/16-18 thread pattern

Click here to place your order.
http://www.tpsmotorsports.com/tps-mo...w-no-****.html

Dave68

Very nice! I'm getting closer to swapping out my BPP shifter....

TPSMak

Don't wait too long we've sold 10 units already and we only have 40... once they are gone there won't be any more available

Dave68

Do you mean "available at this price" or "available at all"? If they won't be available at all, why not?

TPSMak

Normally they are sold with a shifter box from GM but we have them without. Without the box which is allowing us to sell them A LOT cheaper. Since the shifters without the box are gone we'll only sell the one with the box for 175.

Dave68

Since the shifter is angled, I wonder how a "bullet style" shift **** would look/feel? (See picture of bullet **** with vertical-style shifter, below.) Do you have any pictures with this type of shift **** installed?

Thanks and sorry for all the questions.

TPSMak

Unfortunately I don't have any pics of that type of **** with our shifter but I would assume it would looks very similar but with a "slight" angle.

o2bnkc

Just tried to purchase one with paypal. I kept getting an "internal error" message. Will try again tomorrow.

TPSMak

OK... I noticed that Paypal was going through some maintenance.. I just tested an order and it went through fine.

SCRMNC5

are there any left, I'd like to purchase one!!

TPSMak

Yes there is... just go ahead and purchase on off our site and we'll ship one out to you when their ready to ship in about a week.

Bills03Coupe

Does the new shifter box make a difference with regards to shifter vibration? If ordered without the box, is the new snap on end cap included as shown in your post?

TPSMak

The box should not make a difference unless your stock box is worn out. The new snap on end cap is included

Bills03Coupe

Thanks for the quick response! Glad to see I'm not the only insomniac on the forum! One other question, how much length do you remove from the shifter?

TPSMak

Yeah I had to work late last night.. trying to catch up on work at 3AM

We remove about an inch or so.

TPSMak

Just shipped out the 1st batch of orders! We stilll have some left for anyone who wants one

ShaneH85

just placed my order, cant wait to get it! How long should it take to receive it, im in SC 29651

aviatorwes

are most shift ***** this thread pattern?

TPSMak

We're closed for the weekend and July 4th. We will ship out the shifter when we get back in on Tuesday. You should receive the shifter by saturday.

TPSMak

Most C5 shift ***** will fit this shifter .