Z06 Owners - Emblem on Headrest
#1
Banned Scam/Spammer
Thread Starter
Z06 Owners - Emblem on Headrest
I'm hoping I can call on some Z06 owners for a bit of help. I'm having custom seats made for my '01 Widebody project, and will be having the crossed flags logo embroidered on the headrest, like on Z06 seats.
While I've supplied the seat maker with an actual emblem off a C5 to scan, the emblem is much larger than what you'd see on a Z06 seat. He can shrink it to any size, so I'd like to have the emblem reasonably close to stock size.
Would anyone be able to take a couple of measurements for me so that I can give the seatmaker dimensions of what size the embroidered logo should be? The two measurements I'd like to have are:
* Width: The emblem at its widest point (flag-tip to flag-tip)
* Height: The ring at its tallest point (top center of outside of ring to bottom center of outside of ring)
I'd be very grateful to anyone who could provide me with these two measurements.
Thanks in advance.
sixty4 (Mark)
While I've supplied the seat maker with an actual emblem off a C5 to scan, the emblem is much larger than what you'd see on a Z06 seat. He can shrink it to any size, so I'd like to have the emblem reasonably close to stock size.
Would anyone be able to take a couple of measurements for me so that I can give the seatmaker dimensions of what size the embroidered logo should be? The two measurements I'd like to have are:
* Width: The emblem at its widest point (flag-tip to flag-tip)
* Height: The ring at its tallest point (top center of outside of ring to bottom center of outside of ring)
I'd be very grateful to anyone who could provide me with these two measurements.
Thanks in advance.
sixty4 (Mark)
#2
Melting Slicks
Member Since: Feb 2007
Location: Hafnafjörður Iceland
Posts: 2,176
Likes: 0
Received 0 Likes
on
0 Posts
#3
Pro
You are going to need a Z16 owner to chime in, since us regular Z06 owners have the Z06 emblem embroidered on the seat.
#4
Le Mans Master
#5
Le Mans Master
Member Since: Apr 2005
Location: The problem with socialism is eventually the government runs out of other people's money
Posts: 6,600
Likes: 0
Received 1 Like
on
1 Post
From the tips of the flags at the top it was 5.5 inches. Hope this helps, if you need any other measurements PM or email me. Good luck and pics when you're done.
I have the Z16, so this should be what you're looking for.
I have the Z16, so this should be what you're looking for.
Last edited by Hot BluZ; 03-14-2007 at 06:22 PM.
#6
Safety Car
My Z doesn't have flags, it has the Z06 emblem on it. Sorry. Can't help.