success! 4" intake installed
#1
Melting Slicks
Thread Starter
#4
Melting Slicks
Thread Starter
iat sensor is located on the bottom side hidden much cleaner look. its the threaded one. its about 2 inchs forward of the coupler on the throttle body.
the battery den cover is found on the auction site, i sent you a link.
the battery den cover is found on the auction site, i sent you a link.
Last edited by StealthFRC; 02-25-2014 at 08:24 PM.
#5
Melting Slicks
Thread Starter
#8
Race Director
Member Since: Dec 2010
Location: Atlanta, GA
Posts: 10,426
Received 1,260 Likes
on
1,055 Posts
2020 Corvette of the Year Finalist (performance mods)
C5 of Year Winner (performance mods) 2019
looks good... you can get the battery cover from corvette central... I bought it from their ebay auction store but you can get it directly through them also... that was the cheapest place I could find it but it's still an overpriced piece of plastic
#13
Melting Slicks
Thread Starter
i have a dewitts cutdown rad and there spal fan setup but it is the stock shroud that i cut and trimmed to fit. the intercooler cover is the stock a&a that i trimmed to fit the 4" intake, i then painted it with wrinked black paint. works great
thanks
i agree lol...
thanks
i have 2 tial 50's. one where you see it in the pic and the other is pre intercooler
thanks
thanks
i have 2 tial 50's. one where you see it in the pic and the other is pre intercooler
#18
Melting Slicks
I want to do this but I am afraid of the work involved. I already have a full size dewitts radiator and I hear nightmares about how hard it is to get the 4 inch intake in and I don't want to buy a new radiator.
#19
Drifting
http://forums.corvetteforum.com/c5-f...ll-w-pics.html
With the full size rad you'd have to modify the cradle to clear. You could always buy the cut down Dewitts and sell yours. Might be less of a hassle. With the cut down there's plenty of space.