02402ramair

Hey guys. I am looking for a thread where one of our members put the Edelbrock Proflow high rise intake on there C5 vette. I have searched several times with no results of the car/thread I am looking for.

Thanks for any help


Intake I am talking about

http://www.summitracing.com/parts/edl-71393/overview/

02402ramair

Does anyone remember this car?

SBCGENII

Did this car have the upp turbo kit on it?

SBCGENII

http://forums.corvetteforum.com/c5-f...-got-me-d.html

02402ramair

Thats the one. Thanks.

I was looking at this intake for my Vert but now I see the cowl has to go and my Maggie hood would have to be cut I will keep my fast.

robert miller

sell me your fast 102...

02402ramair

I have several Fast 90's, 3 ls2's and a ls6 just sitting around. I don't have a Fast 102 or I would try it. This is on my Vert that is getting a 410ci LQ9 12.5 to 1 with TFS hand ported 225's running solid roller cam and hyd short travel lifters. It will be on E85. Its a buddy's motor that is just sitting so I am going to put it in the vert and see how it does. The super Vic intake I have on my FRC was bought for this motor and was ported to these heads. I might try it with the elbow on my vert and see how it does compared to my ported fast 90.

Can't wait to get the vert back up and going. Its been down a while.

Smoove

Interested to see what OTHER hoods this edelbrock manifold would fit under.

Wipers still work?

robert miller

I guess will be buying new now had one bought for 700.00 then the guy back out and sold it to someone else after tell me it was mine. The vic intake seem to do good on these cars in the high rpm range. Then the elbow also how does the one that bret has on his car do in the rpm range in the 7,k plus. Robert

torkmonstr

i wonder if the edelbrock hi ram will fit under the LPE hood?

0Arun@CCP

I should have a ported FAST 102 for sale soon, maybe even a set of Tooley 245's?

LSOHOLIC

Dang dude......what new setup are you going to ??

.

cptinjak

Thank you so much for this! I too was looking for the very same thread and searching was getting me no where!

Jack

TriplBlk

I went with this as I figured I'd try it out before a beck intake. I will eventually finish this install, but not for a while (enjoying the ITB)

cptinjak

Kris (02402ramair), I didn't realize that this was your post at first! Hope you are well! We in Michigan are forever indebted to your southern hospitality a few years back!

Are you still chasing the 6 speed records?

Jack

JoeyG

I measured the Pro-Flo on my turbo truck and comparing to the L76 intake on my 416, you'll need about 4-4 1/8" of room above the top intake runners on cylinders 6-7-8. So I ordered the intake for my new combo, but it will be April before everything starts to go in. Now to decide on the VIS 4" hood, or the Sunoco monster 6"