a/c man

Thanks for all the nice comments I know 9:70 Is not the fastest street car here but on my budget I'm happy!! can any one suggest a better hooking tire than the 28x10.5x16 M/T et street bias ply I'm running?

c5mtl

Congrats....looking to run close to your times.....what kind of rear wheels are you running?? Firebird?? Did u have to pull your wheel well liners to run 28's

robert miller

At this power level I dont think your going to get one much better if at all... If you do let me know also scott when you find it. Robert

sfc rick

Awesome Scott! A couple of us guys are planning a BBQ one Saturday at PineValley going to run our Vettes and see how we do. It should be a blast, I'm wanting to run mine since I've switched from my VMax(weekend dragbike) to this C5.

4DRUSH

Hoosier makes a 28x10x16 slick you could try, I thought MT made a 28x11x16 slick but I can't find it on Jegs anymore.

Cheapest thing I'd try is M&T inner tubes, 16 rim screws on each side of the tire around 12.5 lbs of air

Nothing going to help if the track prep sucks which is usually the case on T&T days.
Join a track rental or enter an event and track prep should be much better.

a/c man

sweet give me a date I will be there Rick

mdaniel

Aint that the truth. I ran at a local track last week for T&T Wednesday and my short times ranged from 1.3 to over 3 seconds. All over the map as the street tire cars kept screwing up the track and the general prep was marginal at best.

a/c man

I know that has to be the problem thanks for the info man

exploder

I haven't been on here in a long time but I checked today and glad I did. Way to go Scott you deserve it....even if you bested me by .1 tenth. Call me one day, I have a new job as service manager at the local Chevy Dealer.

a/c man

Glade you back!! what tire combo were you running when you were in the 9:80s ??

2003VETT

Congrats Scott!!! Well Deserved...

TracyRR

Congrats on the et's!! That vette is flying

WVcorvetteman

Wow nice time. Hopefully I will be able to get close to that soon.

a/c man

Thanks again guys its not that easy to work on these cars in 100* heat

4DRUSH

Something wrong with that statement, think about it.

a/c man

Thanks again (Blown Blue Brett) for the awesome tune and installing my new Alky control system! you were right about AIS meth kit now this car is spot on just made a pass In her 60-160 awesome and purrs like at cat at red lights

BLOWNBLUEZ06

Shall I post up pictures of the old setup???

It was great to finally meet you and get my A/C fixed up, so I'm glad we're both happy! That's what a fair trade is all about.

a/c man

yes great to meet you you looked tougher than described on here please feel free to post some geto pictures of my old meth setup! was not my wiring even though I do work on my own chit I did the motor rebuild and swap after the unbalanced 402 crank broke in half from another shops build

a/c man

Yea brett has a bad a$$ home 2 A/C units His A/C was under sized for his master bed wife not happy but we fixed that with a bigger higher seer matching unit. while he worked on my beast of a corvette all was cool 2 corvette brothers working together in 100*+ weather helping each other out! brett is no puss when its very hot 100+!!! he even got in the attic crazy heat too!!

MVP'S ZO6

It's been crazy hot here too. I'm watching the news and two different cases where parents left kids in the car with 100+ outdoor temps. Both in blitz's state of Indiana. one car was. 124 degrees inside and the kid was 2 years old or something. What the hell is wrong with people now days?

Ok end of my rant and thread jack.