see5see5run

02 Z 62/65 TTix kit on the way

RideZX6R

Built 347 from TSP, STS TT kit, 7.5psi - 480whp

Dreadnought

'02 Z06 LPE Stage 1 TT, not dynoed

Jeffro_510

2005 Z51, 6 speed - Forged stock cube LS3, AFR 230's, FAST 102, Aruns Jam Cam, ARH headers, Magnaflow bullets, ECS kit, currently waiting on my 2200R to show up, tune and numbers soon.

Chicago1

2001-D1SC 10psi, arun jam cam, full exhaust, fmic, etc etc-668rwhp

NSANEC6

2009 Coupe low boost tune done by Steven Fereday at LMR. Specs are in sig. 808 rwhp 763 rwtq on 10.25 lbs boost. 427 LSX forged.

jmxp69

A&A v3SI, 10psi, Kooks 1 7/8 headers, catless x-pipe, GHL bullets. 460/440. 91 octane, 3.48" pulley. 110* OAT/135* IAT.
CPR Custom Cam and associated hardware go in next week along with an Alkycontrol meth kit.

_zebra

was your parking brake on?



oh wait... i just saw the temps

jmxp69

I know, it sucks. 10* @ WOT due to temps and 91 octane. Hoping the meth and cam change the equation.

jmxp69

Meth and cam woke it up. 594/538.

Z06 Sleeper

Z06 Sleeper - 2004 Z06 , Vortech V2 , A+A set with 3.6 pulley, Race Shop Installed/Tuned, 606 RWHP/515 RWT PLUS Custom Nitrous System already installed ( ? 700 RWHP tbd with dry stage and ? 850 RWHP tbd with wet stage - maybe if i lose the rest of my mind )

meadowz06

99 coupe, 19,500 miles. A&A kit. 480rwhp. auto. V3.

2ooo-C5

A&A V2 Si-Trim, SW headers, 590 / 545

Larzmat

02 Z06, 68k miles.
A&A, 3.8 pulley, Ron Davis w EOC, LG Super Pro LT w Borla Stingers. No idea on power figures, it was tuned 2010 but I don't have any dyno sheets.

I got the car June last year and have added coilovers, radiator, wheels and tires.

Took it to Laguna Seca yesterday for a track event and noticed that I have a pretty decent vibration at 2500 lasting to 3000 rpm, pretty high frequency vibration, almost like a buzz. I have been assuming the following:

Harmonic Balancer (?)
Exhaust/header vibration (?)
Crank (hopefully not) (?)

I was going to get the car dyno'd by A&A but now I want to fix the vibration before doing that.

StatmanRN

STS TT w/ upgraded BW bullseye turbos
Stock internals
Alky control meth
534/556 @10#
M6 upgraded, 3.73 upgraded
Turbowerx pump
N2MB 2 step

stage 2 coming: Forged 9.5 347
TFS 215 heads, roller rockers HS
Rearmount turbo specific custom comp cam
35-50 shot zex
el boost control

Smoove

Smoove- Pro Turbo Kit/custom stock bottom end 787rwhp 696ft-lbs

New engine/turbos/fuel/numbers coming soon.

Jspann602

Finally got my car finished for now...
2000 C5 M6 LS1
ECS Novi 1500 No restrictor plate 10 PSI
CPR Custom Cam 225/236 621/624
Valve Springs
Alky Control Single Nozzle meth
1 7/8" Header no Cats with Borla axle back
RXT Clutch

Made 639/546 in 110 degree weather here in Phoenix, AZ...Hoping for another 20-30 HP when I redyno in the winter. Thank you to all the people on the Forums and the Vendors for all your help.

oldmechanic

A&A intercooled kit with si3 making 12lbs with meth inj., texas speed long tubes, howards cam, Thompson fully forged stroker (blew up stock 40000 mile ls1), ported heads, makes 730 with very quiet STOCK ti mufflers. LOVE to cruse in it now. It's so stock until you push the go petal. Oh, and don't touch the stupid button with the little car on it, you will die!

CamminC5

This post hasent been updated since 2009. May want to post up in here.

https://www.corvetteforum.com/forums...ower-club.html

0Rob@ChampionMotors

Please add my car
2002 Z06
LS7 427 AFR heads Hyd roller cam
TTIX
6 speed
Pump gas with meth
1140 rwhp 1123 rwtq
9.7 @ 159+ @ 21 psi boost
181 mph 1/2 mile @ 14 psi boost