The Ultimate Corvette - MTI Z07 - Based on a 2003 Z06!
#1
Pro
Thread Starter
Last Chance - MTI Z07 - Based on a 2003 Z06!
Torch Red 2003 Z06 with 3,500 original miles.
This conversion originally included an ATI F1C Procharger and low compression 427, however these items have been removed from the vehicle and a new naturally aspirated 427 has been installed.
The car has been redone from A to Z and customized with the following:
Engine Upgrades .......
Brand new 427 cid engine conversion (600 Engine HP - 540 RWHP ) - which features:
- Darton Resleeved LS6 Engine Block
- Forged steel Lunati stroker crankshaft, Lunati billet steel rods & ceramic coated forged Wiseco aluminum pistons
- Fully ported/polished Stage III LS6 cylinder heads
- Custom grind MTI "Z1" Camshaft
- Fast 90MM Intake with 90MM TB
- Jesel 1.7 Roller Rockers
- Complete Kook's stainless steel exhaust system w/ 1 7/8" headers & 3" X-pipe featuring Hi-Flow Cats
- Corsa Touring Pro-Tip exhaust system
- Spec Stage III lightweight clutch assembly
- MTI Ram Air Induction
- High capacity Ron Davis 4 row radiator
- Hardened axle shaft
- High flow custom Mezeire water pump
Braking/Suspension/Wheels ........
- 14" Wilwood front brakes w/ 6 piston calipers. Rear 13" brakes w/ twin piston calipers
- Complete GM T1 suspension package including optional SACHS shocks
- CCW 18" wheels (12 inch front/13 inch rear)
- New Michelin Pilot Sport Tires - 315/35-18 fronts & 345/35-18 rears
Interior ...........
- Complete Vette Essentials interior w/ premium leather, red stitching throughout and "Z07" logos embroidered on the head rests and center console. Package includes new seats, center console, shifter boot, shift ****, emergency brake handle and boot and left/right door pulls
Exterior ........
- Tiger Shark Front and Rear Fascia
- Custom Mini Tub Kit
There is over $90,000 invested in this vehicle and and we are asking $58,000 OBO. All build information and receipts will be provided.
I have photos of the vehicle that I will provide to interested parties and a pre-purchase inspection is encouraged. Door to door enclosed transportation can also be arranged.
Please contact me directly with any questions at (281) 870-8787 or via e-mail davidc@motorsporttech.com
Thank you for your consideration.
David Coates
Chief Operating Officer
Motorsport Technologies
This conversion originally included an ATI F1C Procharger and low compression 427, however these items have been removed from the vehicle and a new naturally aspirated 427 has been installed.
The car has been redone from A to Z and customized with the following:
Engine Upgrades .......
Brand new 427 cid engine conversion (600 Engine HP - 540 RWHP ) - which features:
- Darton Resleeved LS6 Engine Block
- Forged steel Lunati stroker crankshaft, Lunati billet steel rods & ceramic coated forged Wiseco aluminum pistons
- Fully ported/polished Stage III LS6 cylinder heads
- Custom grind MTI "Z1" Camshaft
- Fast 90MM Intake with 90MM TB
- Jesel 1.7 Roller Rockers
- Complete Kook's stainless steel exhaust system w/ 1 7/8" headers & 3" X-pipe featuring Hi-Flow Cats
- Corsa Touring Pro-Tip exhaust system
- Spec Stage III lightweight clutch assembly
- MTI Ram Air Induction
- High capacity Ron Davis 4 row radiator
- Hardened axle shaft
- High flow custom Mezeire water pump
Braking/Suspension/Wheels ........
- 14" Wilwood front brakes w/ 6 piston calipers. Rear 13" brakes w/ twin piston calipers
- Complete GM T1 suspension package including optional SACHS shocks
- CCW 18" wheels (12 inch front/13 inch rear)
- New Michelin Pilot Sport Tires - 315/35-18 fronts & 345/35-18 rears
Interior ...........
- Complete Vette Essentials interior w/ premium leather, red stitching throughout and "Z07" logos embroidered on the head rests and center console. Package includes new seats, center console, shifter boot, shift ****, emergency brake handle and boot and left/right door pulls
Exterior ........
- Tiger Shark Front and Rear Fascia
- Custom Mini Tub Kit
There is over $90,000 invested in this vehicle and and we are asking $58,000 OBO. All build information and receipts will be provided.
I have photos of the vehicle that I will provide to interested parties and a pre-purchase inspection is encouraged. Door to door enclosed transportation can also be arranged.
Please contact me directly with any questions at (281) 870-8787 or via e-mail davidc@motorsporttech.com
Thank you for your consideration.
David Coates
Chief Operating Officer
Motorsport Technologies
We've had this car for sale on several forums for some time and have had a lot of interest, but no serious buyers. If we can't secure a deal within the next few days, we'll be parting it out and taking the vehicle back to stock (with the exception of the mini-tub kit and the Tiger Shark body components).
Last edited by poolfanatic; 11-04-2004 at 08:28 PM.
#6
Pro
Thread Starter
TTT .....
I have pictures and a complete build sheet for anyone who's interested. The car has less than 50 miles since the conversion and the final selling price will now include door to door enclosed transportation to you in the lower 48 states!
I have pictures and a complete build sheet for anyone who's interested. The car has less than 50 miles since the conversion and the final selling price will now include door to door enclosed transportation to you in the lower 48 states!
#7
#9
Pro
Thread Starter
#10
Pro
Thread Starter
Originally Posted by ace67
Will the deal include all the orginal parts ?
#12
Instructor
Member Since: Nov 2004
Location: winnipeg manitoba
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
pictures
could you send pictures please to therin6gs@yahoo.ca
Last edited by kaylen96; 11-04-2004 at 10:22 PM. Reason: i want to put my email address in
#13
#14
Pro
Thread Starter
Update: Most of the components from this vehicle (engine, bolt ons, suspension, etc.) were sold yesterday to a local customer.
We'll be returning the vehicle to stock condition within the next few weeks and will offer it to the CF community again at that time.
We'll be returning the vehicle to stock condition within the next few weeks and will offer it to the CF community again at that time.