416yellowz

2002 Corvette z06 w/ stroker motor for sale. Located in New Orleans, Louisiana. Asking price is $13,500 (negotiable). Please read entire thread .

-Body of car has about 127,000 miles on it. Lowered on stock bolts/ brand new 315 drag radials/tinted windows/ 6 disk cd player/power driver seat,etc.

-Rebuilt RPM transmission to handle the power
-Mcleod RST twin disk clutch
-PFADT transmission brace
-Brand new ECP radiator/ 160 thermostat
-Full long tube headers/x pipe/ b&b mufflers

-Brand new 416 stroker fully built and forged motor installed approximately 2,000 miles ago. Engine runs perfect and makes serious power. LQ9 iron block with 4.065 bore/ Auto Tec flat top pistons/ Scat i beam rods/ melling oil pump/ scat 4inch steel crank/ Ls7 Lifters/ Ported ls3 heads/ PAC springs/ Bullet cam (243/251 .638/.638 113lsa)/ Fast 102 and nick williams 102 tb/ 11.9 compression. Car put down 515/490 on a conservative tune.Everything was built for reliability, nothing was spared.

-Last week, the car was in an accident. I got rear ended and then hopped an 8 inch curb (That's why the car has damage in the front also). The car is deemed total and I'm trying to sell it how it sits.
An overview of the damage... rear bumper was hit/back right quarter panel buckled just a bit/ trunk tub is cracked/front bumper damaged/ the metal under the front left bumper is bent.

-I dont have time to part out the car, and the reason I'm asking 13.5 is because the motor/trans alone is worth at least 10k.
The drivetrain was untouched! Car still starts up and everything under the hood is fine. I am not interested in parting out the car unless you want the drivetrain for 10k.

-PM me for questions or details. Thanks for looking.

416yellowz

Sorry about the sideways pictures. The motor can also handle up to 1,000 hp if you were thinking about wanting to build a boosted car

Redmanf1

Nice looking Vert..

Vetteman Jack

Seller hasn’t been on the forum since 6/13/21. Closing this thread and if the car happens to still be available, the seller can contact me and I’ll reopen the thread.