FS/FT: 06 targa,heads/cam for c5/c5z06
#1
Drifting
Thread Starter
Member Since: Feb 2009
Location: Hoffman Estates Illinois
Posts: 1,408
Likes: 0
Received 0 Likes
on
0 Posts
FS/FT: 06 targa,heads/cam for c5/c5z06
PRICE DROP 28,000!!!
UPDATE: A/c is back on the car and fully functional!!
Up for sale is a built super clean machine silver 06 targa glass top..
Base model.
CLEAN CARFAX!!
Southern car originally out of florida.. When I bought the car I flew down and drove it back all the way from Louisiana without a single problem. Car drives like a dream..was averaging 27mpg with the converter locked.
The car currently has 54k miles on the body..
10k on the trans and diff..
And only 70 miles on the new motor!!!
Always garage kept.
Never seen snow
Non smoker
All oil changes done on time
I've owned 3 corvettes, this one being my 3rd..all of my vettes are always pampered and only get the absolute best!!
Motor:
Assembled and tuned by speed inc.
everything brand spanking new out of the wrappers besides the block
Freshly machined,honed and cleaned 6.0 block..stock bore,stock stroke.
Forged diamond pistons with -2.8cc reliefs..stock bore
Forged eagle H-beam rods, length 6.200
New stock crank
Clevite rod bearings
Cam bearings
MS4 cam
SLP oil pump
Double Roller timing chain
46lb FAST injectors
UD pulley
ARP rod bolts
ARP balancer bolt
Ported LS2 intake manifold
Vararam intake
Aftermarket radiator/oil cooler
I HAVE ALL RECEIPTS FROM SPEED INC FOR MOTOR AND CONVERTER
Heads:
Worked by Wegners motorsports..absolutely amazing job! Awesome guys!
Ported/polished 799 heads
Milled .030 to get 11.2:1 compression
LS9 head gaskets
Stock rockers
Manley valves
PAC .675 lift double springs with titanium retainers.
7.400 hardened pushrods
ARP head bolts
Drivetrain:
All work done within 10k miles ago by Horsepower Sales of Florida
A6 transmission..was freshened up and got upgraded clutch packs
Trans cooler
RPM built differential with a 3.42 gear
Pfadt mounts
Yank 3600SS (just put in by Speed Inc..less than 100 miles on converter)
Exhaust:
1 7/8 American racing headers
3inch xpipe
At the moment the exhaust has turn downs right out the x-pipe..but I do have a dual mode c6z06 cat back that will go with the car if I don't put it n by time it sells..
Exterior: 9.5/10... Paint is absolutely gorgeous..only a few typical rock chips on front bumper...no accidents,scratches,dents,cracks,etc.
Has a aftermarket spoiler not sure on the brand.
Blacked out tail lights, front and rear side markers
Lowered
5% tints
Cleanest machine silver c6 you'll find!!!!
Interior: 9/10.. Excellent shape
Wolfe 6-point roll cage with removable side bars.
6point harness
Go-pro mount on the roll bar
The mirror cover on the passenger side visor is broke, cheap fix
the rear carpet has 2 cuts in it for the roll cage..that's it!!! Everything else is flawless..NO LEAKS
I also have a 16" CCW drag pack with hoosier drag radials that can be sold with the car but price will go up. The car will have flawless stock c6 wheels on it.
Price is $32,000 OBO without CCWs
i have well over that invested!!
Looking for semi built c5s or z06s..
Cam only, Heads/cam, built drivetrain..anything around that region I will consider..not looking for bone stock cars..not too picky on color..not interested in junk..I like keeping my cars immaculate.
my main goal would be finding a auto c5z06 but I'm sure that's unlikely..
I will also entertain other trade offers..
Car is located in Hoffman Estates, IL
Can be reached the easiest Via text anytime 847-707-8013
Don't mind the plates from my z06 i had prior to this vette
Motor and heads
Video with new motor
UPDATE: A/c is back on the car and fully functional!!
Up for sale is a built super clean machine silver 06 targa glass top..
Base model.
CLEAN CARFAX!!
Southern car originally out of florida.. When I bought the car I flew down and drove it back all the way from Louisiana without a single problem. Car drives like a dream..was averaging 27mpg with the converter locked.
The car currently has 54k miles on the body..
10k on the trans and diff..
And only 70 miles on the new motor!!!
Always garage kept.
Never seen snow
Non smoker
All oil changes done on time
I've owned 3 corvettes, this one being my 3rd..all of my vettes are always pampered and only get the absolute best!!
Motor:
Assembled and tuned by speed inc.
everything brand spanking new out of the wrappers besides the block
Freshly machined,honed and cleaned 6.0 block..stock bore,stock stroke.
Forged diamond pistons with -2.8cc reliefs..stock bore
Forged eagle H-beam rods, length 6.200
New stock crank
Clevite rod bearings
Cam bearings
MS4 cam
SLP oil pump
Double Roller timing chain
46lb FAST injectors
UD pulley
ARP rod bolts
ARP balancer bolt
Ported LS2 intake manifold
Vararam intake
Aftermarket radiator/oil cooler
I HAVE ALL RECEIPTS FROM SPEED INC FOR MOTOR AND CONVERTER
Heads:
Worked by Wegners motorsports..absolutely amazing job! Awesome guys!
Ported/polished 799 heads
Milled .030 to get 11.2:1 compression
LS9 head gaskets
Stock rockers
Manley valves
PAC .675 lift double springs with titanium retainers.
7.400 hardened pushrods
ARP head bolts
Drivetrain:
All work done within 10k miles ago by Horsepower Sales of Florida
A6 transmission..was freshened up and got upgraded clutch packs
Trans cooler
RPM built differential with a 3.42 gear
Pfadt mounts
Yank 3600SS (just put in by Speed Inc..less than 100 miles on converter)
Exhaust:
1 7/8 American racing headers
3inch xpipe
At the moment the exhaust has turn downs right out the x-pipe..but I do have a dual mode c6z06 cat back that will go with the car if I don't put it n by time it sells..
Exterior: 9.5/10... Paint is absolutely gorgeous..only a few typical rock chips on front bumper...no accidents,scratches,dents,cracks,etc.
Has a aftermarket spoiler not sure on the brand.
Blacked out tail lights, front and rear side markers
Lowered
5% tints
Cleanest machine silver c6 you'll find!!!!
Interior: 9/10.. Excellent shape
Wolfe 6-point roll cage with removable side bars.
6point harness
Go-pro mount on the roll bar
The mirror cover on the passenger side visor is broke, cheap fix
the rear carpet has 2 cuts in it for the roll cage..that's it!!! Everything else is flawless..NO LEAKS
I also have a 16" CCW drag pack with hoosier drag radials that can be sold with the car but price will go up. The car will have flawless stock c6 wheels on it.
Price is $32,000 OBO without CCWs
i have well over that invested!!
Looking for semi built c5s or z06s..
Cam only, Heads/cam, built drivetrain..anything around that region I will consider..not looking for bone stock cars..not too picky on color..not interested in junk..I like keeping my cars immaculate.
my main goal would be finding a auto c5z06 but I'm sure that's unlikely..
I will also entertain other trade offers..
Car is located in Hoffman Estates, IL
Can be reached the easiest Via text anytime 847-707-8013
Don't mind the plates from my z06 i had prior to this vette
Motor and heads
Video with new motor
Last edited by Badd LS6; 10-09-2013 at 06:25 PM.
#9
Drifting
didn't u just get the car?lol. looks like a great build and an awesome guy to deal with guys. im actually thinking of getting rid off my c5 zo6 and upgrading to a c6 zo6.
ttt
ttt
#10
Drifting
Thread Starter
Member Since: Feb 2009
Location: Hoffman Estates Illinois
Posts: 1,408
Likes: 0
Received 0 Likes
on
0 Posts
Why trade it for a c6z when you can trade it for a c6z killer haha
Last edited by Badd LS6; 12-03-2012 at 11:19 PM.
#12
Heel & Toe
Member Since: Aug 2011
Location: Greensboro nc
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
#13
Drifting
Thread Starter
Member Since: Feb 2009
Location: Hoffman Estates Illinois
Posts: 1,408
Likes: 0
Received 0 Likes
on
0 Posts