FS : 2001 QS Corvette Z06. 27K Miles, 390 RWHP! CCW RIMS!
10-07-2009, 11:57 PM
#1
Drifting
Thread Starter
FS : 2001 QS Corvette Z06. 27K Miles, 390 RWHP! CCW RIMS!
Here is My 2001 Corvette Z06, it has a babied 27,300 miles on it. Everything on the Car is in EXCELLENT / NEAR MINT Condition. I bought the car from the Original Owner with 16,000 miles in 2007. I am the Second Owner. This car has always been kept in a Climate Controlled Garage. There are only two Small Paint blemishes on the entire car. One is on the Passenger side Mirror and the other on the lower door, they are both the size of a Pencil Tip or Pen tip, they are too small to photograph. I believe they happened while driving at high speed. They both have been professionally touched up, so you can’t even see them. I just want to be honest. There are no other Blemishes on this entire car at all. The Interior is 100 % Perfect. My Z06 is also Mechanically Perfect. Burns no Oil, Drips no Fluids. No Check Engine Lights / ABS Lights. Everything Works Perfect! This Z06 is truly a 9.5 out of a 10. The Engine, Under Carriage, Interior is all Spotless. The Original owner claimed the car had never seen rain or snow. I too have kept it as my weekend car and only driving it on nice Sunny days. Never in Rain or Snow.
The Exterior Color is GM Quick Silver. It has the all Black Leather Interior. I have extensive Documentation, Original Window Sticker, sales receipts for Modifications to the Car. Almost all my Z06’s Modifications and Performance Dyno-tune were done by Finish Line Performance in Naperville, Illinois. My Car makes 390 Rear Wheel HP and 382 Rear Wheel Torque. Which Equals to around 450 Engine HP!. A Stock 405HP 2001-2004 Z06 makes 340RWHP – 355RWHP on a Chassis Dyno. Here is a list of the Modifications.
LG PRO LONG TUBE CERAMIC COATED STAINLESS STEEL HEADERS
LG OFF-ROAD STAINLESS STEEL CERAMIC COATED X-PIPE
LG PRO FLOW CATALYTIC CONVERTERS – V BAND
LG PRO FLOW STRAIGHT TUBES CATALYTIC DELETES – V BAND
GHL BULLET STAINLESS STEEL QUAD EXHAUST
HALTECH TUNNEL PORT FRONT BUMPER AIR INTAKE
DONALDSON BLACKWING AIR FILTER / INTAKE
DONALDSON SMOOTH AIRBRIDGE
HOTCHKIS SWAY BARS
MARCH PERFORMANCE UNDER DRIVE PULLIES
CCW 505a’s RIMS. (19 x 10 FRONT) (19 x 11 REAR)
MICHELIN PS2 TIRES. (275/30/19 FRONT) (305/30/19 REAR)
BAER ERADISPEED +2 UPGRADED 13.35” FRONT C6 Z51 ROTORS
BAER ERADISPEED +2 UPGRADED 14.00” REAR ROTORS
HURST SHORT THROW SHIFTER W/ C6Z06 SHIFT ****
HAWK PERFORMANCE BRAKE PADS
RAPTOR SHIFT LIGHT
DEFI – HEADS UP DISPLAY - RPM + SPEED + RECORDER+ PLAYBACK
PERIPHERAL iPOD INTERFACE / ADAPTER
CORVETTE GARAGE 5000K HID XENON HEADLIGHTS
LOYDS Z06 FLOOR MATS
LOYDS Z06 HOOD & TRUNK LINERS
LOYDS INSULATED TRUNK PARTITION
OPTIMA RED TOP BATTERY
ZIPS FRONT / REAR LOWERING KIT – CAR IS 1.0” LOWER THAN STOCK
I have the Stock Rims, Tires, Rotors, Brake Pads, Front License Plate Cover & Other Items that will all go with the Sale of the Car. Finish Line Performance installed a really trick V-Band Clamp system from the Headers to the Catalytic converters and X-Pipe. You can simply Un-Clamp the Catalytic Converts and Install the Straight Pipes in about 30 minutes for a few more Horse Power and an even louder Exhaust. The Catalytic converters are currently installed on the Car. The Straight Pipes are Included with the Car. I just purchased the CCW Rims and Michelin PS2 Tires this spring for the car at a cost of over $4500.00. They are like NEW. They maybe have 3000 miles on them. No Curb, Road Rash at all. The Baer brakes Rotors and Hawk Pads are all also new. I also have a set of Baer Eradi Speed +2 Rotors in the Stock sizes to fit behind the original Z06 Rims. My Z06 easily has over $15K in Modifications and will not disappoint you. I am Confident that you could jump in this car and Drive it anywhere the Roads will allow you to go, with no Problems. My Cars Paint Really is Almost Perfect! The car has never been in an accident, has had no body or paint work done and I have the title in hand. Thanks for Looking. Car is located in Champaign Illinois 61821. (217) 377-5169.
The last pictures is of the Original Z06 Rims / Tires and the Straight Pipes / Cataylic Converter Deletes.
I'm asking $27,000 or Best Offer. I did just have this listed on Ebay. I did not meet my Reserve of $27K.
I feel this is a very Fair price for a car of this Caliber in this Perfect Shape. I had several people offer me $25K by phone after the auction and I refused. I even had a guy drive 6hrs from Ohio and also Offer me $25K (I told him on the phone I would not accept 25K) so he left Mad with no Car. I would have taken 26, but he didn't offer.. Ohh Well.. So please don't low ball me. I'm only selling because I want a C6Z06 and to mod it.. Thanks..
Last edited by slvrzo6; 10-08-2009 at 12:07 AM.
10-09-2009, 04:34 PM
#5
Pro
Member Since: Oct 2006
Location: Clearwater FL
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
I'm asking $27,000 or Best Offer. I did just have this listed on Ebay. I did not meet my Reserve of $27K.
I feel this is a very Fair price for a car of this Caliber in this Perfect Shape. I had several people offer me $25K by phone after the auction and I refused. I even had a guy drive 6hrs from Ohio and also Offer me $25K (I told him on the phone I would not accept 25K) so he left Mad with no Car. I would have taken 26, but he didn't offer.. Ohh Well..
I feel this is a very Fair price for a car of this Caliber in this Perfect Shape. I had several people offer me $25K by phone after the auction and I refused. I even had a guy drive 6hrs from Ohio and also Offer me $25K (I told him on the phone I would not accept 25K) so he left Mad with no Car. I would have taken 26, but he didn't offer.. Ohh Well..
