'85 Corvette in good condition. Auto, 118K. I have some receipts for these parts. Brand new BF Goodrich tires, NAPA brake pads, completely rebuilt front suspension with Moog parts and urethane bushings. Engine has a few mild mods including Edelbrock aluminum heads, Cloyes roller timing chain, new HD water pump, newer style starter, 24# Bosch II injectors, BBK regulator, new AC Delco fuel pump, long tube headers, Magnaflow mufflers. Transmission was rebuilt at 107K miles with stronger parts by previous owner. Pioneer CD player and Alpine speakers with all new 16 gauge wiring. The heater core was replaced last year.
I also have a cam (Comp cam .505/.515) that is not installed. A few other new parts going with it: door weather strip, new GM emblems, power steering hose. All original parts included EXCEPT original exhaust and radio.
Clearcoat is starting to peel on the hood and roof pretty bad, so it needs new paint. The Cruise control works intermittently, i've tested the servo its good. The power antenna is stuck in the up position, still gets good radio reception though. Link with some pics... http://cincinnati.craigslist.org/cto/1273841389.html
I'm asking $3750, this is a great deal considering you can drive the car anywhere without worries. If you have any questions, send me a pm or give me a call 513-571-9158. If I dont answer please leave a voicemail.
Last edited by Demonic85; 08-21-2009 at 07:23 PM.
Reason: typo
excellent car for the $$. im shocked that no one has snatched this up yet
better heads, headers, catback, rebuilt trans, and a cam goes with the car? thats an easy 12 sec combo for only $3500
what size combustion chambers are the edelbrocks? are they the performer or performer rpm heads? i see that you provided the lift on the cam, whats the duration?
excellent car for the $$. im shocked that no one has snatched this up yet
better heads, headers, catback, rebuilt trans, and a cam goes with the car? thats an easy 12 sec combo for only $3500
what size combustion chambers are the edelbrocks? are they the performer or performer rpm heads? i see that you provided the lift on the cam, whats the duration?
bump for an amazing corvette value!
The Edelbrock Performer heads have 70cc combustion chambers (gives it a 9.5:1 compression ratio), 2.02 intake/1.6 exhaust, 170cc intake runners (sounds low but is PERFECT for TPI), the springs can handle .575 lift. The only difference between Performer and Performer RPM is that the RPM's springs can handle .600 lift. I also used hardened comp cams pushrods as well. I still have the original cast iron heads but they will need a valve job to put them back in use.
I uploaded some pics. I had to raise the hood so you could see what I meant about the clearcoat peeling. Sorry about the dirty engine pics, I havent cleaned it up yet. Also had to use my cell phone.
Demonic, thanks for the pics! Im starting to get more and more interested. Wish it was a stick, but I guess I can deal with it
Im a long ways off, so Ill have to ask a lot of questions and perhaps have another member in the area look at it before I burn the leave to go out there. That said, how is the digidash? AC? Z51 susp? Leaks in the roof? Squeks, creaks, things that go bump in the night?
Where are you located in Ohio? Id like to see about a 3rd party going to take a look at it for me. thanks
Demonic, thanks for the pics! Im starting to get more and more interested. Wish it was a stick, but I guess I can deal with it
Im a long ways off, so Ill have to ask a lot of questions and perhaps have another member in the area look at it before I burn the leave to go out there. That said, how is the digidash? AC? Z51 susp? Leaks in the roof? Squeks, creaks, things that go bump in the night?
Where are you located in Ohio? Id like to see about a 3rd party going to take a look at it for me. thanks
The digidash is in great shape, I replaced the bulbs not long after I bought it. The AC works but makes noise, so I dont use it. It was converted to R134 by the previous owner. Its a base suspension car, but it has the heavy duty cooling option. The roof does not leak. Just the normal squeaks you get from a C4, i've tightened the screws so its not so bad.
There are several forum members that I hang out with if you'd like they're opinion. You could talk to Tim (forum member: Mike Mercury), he's seen my car inside and out numerous times since I bought it.
Corvette Store
FS: '85 coupe in SW Ohio
