I have a 87 coupe for sale that is apart. Was building a LS1 C4. Frame and under carriage cleaned and painted black with under coating. This is a factory manual car with dana 44 rearend. The rear is new with 3.73 gears,seals and bearings. Half shafts cleaned and have new u-joints. All rear bushings replaced with urethane bushings. All parking brake components are new including cables. New drilled and slotted rotors and I have a set of 4. The hood is the only body panel that I do not have and no windshield. New front wheel well panels. I do have most of the interior. No digital dash (was going to use stewart warner gauges instead). Doors are complete with glass and electrics and I have the rear glass as well. Does not have a targa top just a frame from an old top.The motor is a 97 LS1 that is honed for standard bore pistons with a crank that is turned 0.010 on the mains and rods (along with new bearings).I do not have the pistons just rods with old pistons on them. New cam bearings installed with a Lunati Voodoo cam and stock lifters. New timing chain and new oil pump.Front and rear covers seals are new and has an F-body oil pan and pick-up to fit the C4 frame. The A/C and heater have been removed since this car was only going to see summer driving and provide additional clearance for the motor. Rear tires can be bolted on the car for transporting but the front suspension is still out of the car. I am asking for $4,000 for the whole thing. I am located in St.Charles , Missouri 63304 . 25 miles west of St.Louis airport.
Corvette Store
F/S 87 project car
