Just some info on a miss I had
#1
Instructor
Thread Starter
Just some info on a miss I had
Hey everyone, I have received a bunch of help reading the threads on this forum so I thought I would return by telling how I cured my miss. The coil tray spade connectors had some type of corrosion/varnish on them and I had a hard time getting continuity. sanded them down and used some dielectric grease around the seals to keep moisture and humidity out. the car comes loose all the time now and it drives so smooth at 1000 RPM in 6th. Was reading how people were trying to find out why their coils were not firing so that is how I discpvered it using my meter.
The following users liked this post:
GraphMan (12-18-2018)
#2
Tech Contributor
Hey everyone, I have received a bunch of help reading the threads on this forum so I thought I would return by telling how I cured my miss. The coil tray spade connectors had some type of corrosion/varnish on them and I had a hard time getting continuity. sanded them down and used some dielectric grease around the seals to keep moisture and humidity out. the car comes loose all the time now and it drives so smooth at 1000 RPM in 6th. Was reading how people were trying to find out why their coils were not firing so that is how I discpvered it using my meter.