parts needed for 94 ZR1/ C4

[bumperkar kid]

a friend is in need of some parts to complete his newly awarded ncrs top-flight 94 ZR1. please.. original parts or n.o.s. only. thanks in advance. they are as follows...
1. ash tray
2. black ac oil filter
3. license plate screws
4. air pump filter
5. all 4 wheel decals
6. all 4 valve stems and caps
7. writing paper pad from owners manual

call steve at (925) 754-3696

[secondchance]

Originally Posted by bumperkar kid

a friend is in need of some parts to complete his newly awarded ncrs top-flight 94 ZR1. please.. original parts or n.o.s. only. thanks in advance. they are as follows...
1. ash tray
2. black ac oil filter
3. license plate screws
4. air pump filter
5. all 4 wheel decals
6. all 4 valve stems and caps
7. writing paper pad from owners manual

call steve at (925) 754-3696

1. I think is available from Mid America, Corvette Central, etc...
2. Whiteracingproducts.com has black AC Delco. Whether it's correct, I am not sure.
http://www.whiteracingproducts.com/i..._image&pID=749
3. It's a anodized torx head w/ wide washer. Perhaps check w/ Phrog.
4. Not sure.
5. Wheel decals - regarding sensors, I believe, are available at Corvette Central
http://www.parts123.com/parts123/yb....rta~partsort~1
http://www.parts123.com/parts123/yb.dll?parta~partsort
6. Most likely a typical GM. Arn't these typically thrown out when tires are serviced? I am not sure it has changed since 1994.
7. Not sure.

What is his vin? I have a 94 #256.

[bumperkar kid]

i'll give him your info. not sure of his vin, but i think it was built sometime in june. thanks...

[Z51JEFF]

Originally Posted by bumperkar kid

a friend is in need of some parts to complete his newly awarded ncrs top-flight 94 ZR1. please.. original parts or n.o.s. only. thanks in advance. they are as follows...
1. ash tray
2. black ac oil filter
3. license plate screws
4. air pump filter
5. all 4 wheel decals
6. all 4 valve stems and caps
7. writing paper pad from owners manual

call steve at (925) 754-3696

The licence plate screws are at the dealer,I just got these a week ago.That is if they are the same as 91.

[secondchance]

Originally Posted by Z51JEFF

The licence plate screws are at the dealer,I just got these a week ago.That is if they are the same as 91.

I think so. I had a 91 and currently have a 94. They are both torx head.

[95 LT5]

Hi,

In regards to #2, the oil filter, It is not the correct one,
I have some of the correct ones.

The correct ones do not have the barcode on them.

[secondchance]

Originally Posted by 89BlackVette

Hi,

In regards to #2, the oil filter, It is not the correct one,
I have some of the correct ones.

The correct ones do not have the barcode on them.

Did not know that! Well, terrific that you stepped up.

[bumperkar kid]

Originally Posted by 89BlackVette

Hi,

In regards to #2, the oil filter, It is not the correct one,
I have some of the correct ones.

The correct ones do not have the barcode on them.

p.m. sent!

[Peter Mahr]

I got a good reproduction Air Injector Reactor filter from a friend. I will try to get a contact name and number for you.

I have looked all over for the valve stem caps that have the correct "Piedmont 712 USA" stamped on the side. So far I have struck out. Any suggestions would be appreciated. There are three of us searching for these and we need a total of 9 caps. The valve stems sold by Eckler's and probably others looked correct to me and the NCRS judges.

[bumperkar kid]

hey peter...what ever i find out on this end i will surely pass on to you.

[Peter Mahr]

The Air Injector Reactor filters are being reproduced by Don Griffin in Florida. He can be reached at ddroadrun@msn.com or 248-535-3517. They look correct to my NCRS judge friend so they are good.