jabrun

Does anybody know where the CDM audio processor is on a ZR-1?

gunnerja

Right side dash to the left of the fuse box. Enjoy.

phrogs

depends on the year

gunnerja

Correct I know early 90-91 are where I said. Not sure on the later years

jabrun

It's a '91.

tomtom72

If the 91's are the same as the 90's it's above the carpet hush panel below the glove box. Factorycarsterorepair.com has a good "how to" on getting the CDM out...the only thing I would add to their instructions is that attached to the bottom of the mount for the CDM is 7 wire bundles w/plugs. If you unplug the bundles & move them over to the left & right, you can work easier...as far as getting the mount & the CDM to separate from each other...oh yea take the stuff off of the front(by the firewall) of the CDM mount...I think they are a bunch of relays and fuse holders...they restrict movement that you need to wiggle the CDM out & back in again. It is tight spaces but if you don't get mad & take your time it goes fairly smooth...I took alot of "attitude adjustment" time outs!:o


Tom

jabrun

Thanks for all the help. I was staring at it the whole time but I saw what I thought was clear vaccum tubing going into the module so I thought it was a climate control processor. It turned out they were wires with clear insulation covering them.