6.0 LS Swap/Build
#601
Tech Contributor
Thread Starter
I'm shooting for 14.5 cruise, 14.2 idle and 12.9 WOT.
I have a custom spark map based on the LS3 map. I am running MSD 6014 for spark control
I have a custom spark map based on the LS3 map. I am running MSD 6014 for spark control
#602
Advanced
Damn, I got my dakota digital box 2 weeks ago, but weather has been so poor here in middle Finland, that it still wait installing...
Would be nice to get transmission work, there is lot to do with those sifting parameters, but now it looks that it will go to next summer
(not possible to adjust on wet tarmac and +2 - +5 Celsius
And of course, no dyno before transmission is ok. And you can imagine how much burns to see horsepower and torque
Would be nice to get transmission work, there is lot to do with those sifting parameters, but now it looks that it will go to next summer
(not possible to adjust on wet tarmac and +2 - +5 Celsius
And of course, no dyno before transmission is ok. And you can imagine how much burns to see horsepower and torque
#603
Burning Brakes
6.0 ls swap build
Read all 31 pages can't find the 4 to 6 bolt trans adapter. for the 4l60 using the 700r4 tailshaft. Anyone have a link.
I know
I saw it somewhere and it was inexpensive,
Thanks
Billy
I know
I saw it somewhere and it was inexpensive,
Thanks
Billy
#605
Melting Slicks
Any Plans to have your car dyno'ed Pwnage?
#606
Tech Contributor
Thread Starter
Maybe one day! Not really high on my list of priorities. I would like to but the closest dyno to me is a really busy place. Maybe next year. I enjoy driving it so much that I don't want to be disappointed when it makes 300 rwhp
#607
this looks like the part you might want : https://www.quadratec.com/products/5...kaAtC_EALw_wcB
$350 ....
$350 ....
#608
Burning Brakes
this looks like the part you might want : https://www.quadratec.com/products/5...kaAtC_EALw_wcB
$350 ....
$350 ....
Thanks Again
Billy
The following users liked this post:
knikula (10-19-2019)