Special purchase on bosch 3's brand new
#1
Supporting Vendor
Thread Starter
Special purchase on bosch 3's brand new
WE WERE ABLE TO PURCHASE BRAND NEW (NOT REBUILT) BOSCH 3 INJECTORS FROM BOSCH. THESE ARE NO LONGER BEING MANUFACTURED. WE HAVE ONLY 40 SETS AVAILABLE. THEY ARE 22LBS FOR THE 86-91 L98 ONLY.
WE ARE INCLUDING A FELPRO PLENUM SET, A NEW E10 COMPATABLE REGULATOR DIAPHRAM AND A VITON O RING SET FOR THE CROSSOVER TUBES AND REGULATOR.
WE ARE OFFERING THE COMPLETE SETS WITH A LIFETIME WARRANTY ON THE INJECTORS AS LONG AS YOU OWN THE CAR FOR $419.00 SHIPPED ANYWHERE IN THE USA.
WE ARE INCLUDING A FELPRO PLENUM SET, A NEW E10 COMPATABLE REGULATOR DIAPHRAM AND A VITON O RING SET FOR THE CROSSOVER TUBES AND REGULATOR.
WE ARE OFFERING THE COMPLETE SETS WITH A LIFETIME WARRANTY ON THE INJECTORS AS LONG AS YOU OWN THE CAR FOR $419.00 SHIPPED ANYWHERE IN THE USA.
Last edited by FICINJECTORS; 10-22-2013 at 02:11 PM.
#2
Team Owner
So Bosch III injectors are done? Now what? Bosch IV?
#3
Supporting Vendor
Thread Starter
#4
Drifting
#5
Burning Brakes
I got some Bosch 4's from Jon a couple of years ago for my '93. I used them for about 700miles and went back to the 3's. What I didn't like was they were shorter and had a couple of leaks, but was able to get that solved. The three's seemed to get me better fuel economy. If there was some extenders to make them a little longer would help. Jon did make me some longer electrical connectors that did work as the 4's work better on newer series motors. I would recommend the 3's, especially if you have stock gm's in the car.
#8
Supporting Vendor
Thread Starter
#9
Race Director
Jon recently sent me 2 new Bosh IIIs to replace a couple bad ones I had purchased from him. No charge and no shipping cost.
GREAT customer service!
GREAT customer service!
#10
Supporting Vendor
Thread Starter
#11
Racer
Member Since: Mar 2011
Location: Derby (Wichita area) KS
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
I bought a set of the rebuilt Bosch III's for my 89 a few weeks ago. I really didn't realize how bad my originals were. I highly recommend these injectors (which I purchased based on other's recommendations) and the guys at FIC shipped them out right away complete with a new FPR diaphragm and gaskets. Can't beat that.
#12
Supporting Vendor
Thread Starter
I bought a set of the rebuilt Bosch III's for my 89 a few weeks ago. I really didn't realize how bad my originals were. I highly recommend these injectors (which I purchased based on other's recommendations) and the guys at FIC shipped them out right away complete with a new FPR diaphragm and gaskets. Can't beat that.
#14
Drifting
Member Since: Aug 2013
Location: Everett Washington
Posts: 1,463
Likes: 0
Received 0 Likes
on
0 Posts
#16
Drifting
Member Since: Aug 2013
Location: Everett Washington
Posts: 1,463
Likes: 0
Received 0 Likes
on
0 Posts
#17
Instructor
Member Since: Jan 2010
Location: Coral Springs Florida
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Hi Jon I bought a set of rebuilt 22LBS Bosch III's from you last year for my 1992 LT1 . Is this the correct size for my 92 LT1 corvette ? You show the new ones for 86 thru 91 L98's only thats why I ask now. Thanks for checking.
#19
Supporting Vendor
Thread Starter
The 92 LT1 takes a 22lb. but all the other years take a 24lb.