You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Corvetteforum.com today!
The info I found is 85 & 86 were the same. 202/206 @ .050", lift with 1.5 rocker is 403/415 and lobe separation 114.5. For the cam you are looking at, you may have problems with clearance. I have heard max lift on stock heads is around .480.
previous Vettes: 84 CFI auto, 99 Nassau Blue 6-speed
current Vette is a Turquoise Metallic 91 automatic, 3.07's, Fast Burn heads, SD LT-4 cam, Bosch III's, Accel Super Ram & 58MM TB, LT-1 manifolds, Magnflow catted Y, Flowmaster direct replacement mufflers, 1984 Z51 springs, Koni's, J55 brakes, Nitto 555's, VB&P 32mm front sway bar
Hi I have the TPIS cam Torque Secrets : int/exh duration 221/230, lift .454 with 1.5 lifters
112 lobe separation. There is a slight lope on idle, but the cam is good gives a good pull.
A stock engine will be slightly vercammed , but have good results .