Please post pix of your procharger system
#1
Former Vendor
Thread Starter
Member Since: Feb 2002
Location: DFW, TX www.vettestripes.com
Posts: 7,812
Likes: 0
Received 2 Likes
on
2 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08
Please post pix of your procharger system
Hi,
I bought a D1SC head unit which was installed on a C4 so I just make sure the oil slinger is in the same position on C5 A&A bracket.
Please post up
Thanks in advance!!!
-Mike
I bought a D1SC head unit which was installed on a C4 so I just make sure the oil slinger is in the same position on C5 A&A bracket.
Please post up
Thanks in advance!!!
-Mike
#3
Former Vendor
Thread Starter
Member Since: Feb 2002
Location: DFW, TX www.vettestripes.com
Posts: 7,812
Likes: 0
Received 2 Likes
on
2 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08
So if your oil slinger in position A or C and your blue serial number is on top then head unit will be in trouble.
Now, if all C4 installation to have the blue serial number to be on top, then I'm fine as well because my C5 AA bracket also have the blue serial number on top.
-Mike
#5
Drifting
Member Since: Aug 2002
Location: Speedo Indiana
Posts: 1,475
Likes: 0
Received 0 Likes
on
0 Posts
Yes, but that's how they mark it. By putting the serial number tag in the correct position so you know how the slinger has been clocked. I have been told by Procharger that after the housing is clocked, it is hard/impossible to change it.
#6
Last edited by Brand-X; 11-11-2007 at 02:00 PM.
#7
Former Vendor
Thread Starter
Member Since: Feb 2002
Location: DFW, TX www.vettestripes.com
Posts: 7,812
Likes: 0
Received 2 Likes
on
2 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08
C4 got oil slinger in C position and no, reclocking is very simple. ATI charges $130 to do it and I will do it myself next week.
-Mike
Last edited by Vette Stripes; 11-05-2007 at 01:08 AM.
#8
ProCharger pic's