need to identify a wiring connector 90 and 91 Vettes>>
#1
Race Director
Thread Starter
need to identify a wiring connector 90 and 91 Vettes>>
it is on the engine harness in the location near the Brake booster. it is a C137 or C138 in the Shop Manual 4 pin connector.. 1 pin is empty, 2 wires are for the fans and the 3rd is a Black with White stripe and goes to?
I cannot find the info in the book.. before I start Ohming the wire.. anyone know where is goes?
I cannot find the info in the book.. before I start Ohming the wire.. anyone know where is goes?
#2
Burning Brakes
Re: need to identify a wiring connector 90 and 91 Vettes>> (-=Jeff=-)
Jeff
I am looking at pg 8A-14-5 of my 91 shop book
Looks like the Blk/WHT is a ground (referance) for the ECM which is common with the coolant sensors& cruise
They are all tied together at S119, where ever that is and then bonded to ground.
John
I am looking at pg 8A-14-5 of my 91 shop book
Looks like the Blk/WHT is a ground (referance) for the ECM which is common with the coolant sensors& cruise
They are all tied together at S119, where ever that is and then bonded to ground.
John