SDS Photography

how did u guys paint your SRs? i think i would need a pro since my skills of detail are fairly low.

vetster86

Thanks 85vet

bmalec

Wow, beautiful work guys!

If I get my L98 looking even half as good as you guys have done, I'd be proud

Ben

AKS Racing

Just testing to see if the pic will show vs the link. Please be patient.


Aaron

Why will this not show up? I am trying to get a pic from the CF gallery. Here is the link that is surrounded by the [IMG]s:
http://forums.corvetteforum.com/phot...cat/500/page/1

Thoughts?

GREGGPENN

Because you did not include the NAME of the pic! Go back to that page and right click on the pic. Select save pic as.... You'll see the name of the pic. That name needs to be included with your link.

cplonner

That engine looks amazing, what are you power numbers and times?

JrRifleCoach

Thars some darn fine work out there!

mseven

AKS Racing image

This is a nice peice !!!!
I can't do it that way either I use image shack or tiny pics for free hosting.

skateparkdave

mseven, your set up is strikingly clean. I love the black and silver combo. I may have to copy you someday when the $$ rolls in.

Hey, what'd you do with that open EGR pipe on that passenger side hooker?? Can't imagine you left it that way to pump heat and fumes into the engine bay. Just wondering.

mseven

Thanks Dave, and to others for the kind words as well.
I decided "while I was in there'' I might as well just powder coat everything.

Actually this was shot after I had it up and running, but the EGR tube was never drilled through the header. Originally I had bought the headers and was going to use a different intake with the AIR etc. I changed directions entirely and ended up keeping the headers (only regret now with this set-up not having the 2151) I have since put a plate on it for cosmetic purposes (powder coated texture blk. of course).
I was thinking of adding a " TB N spacer plate" like yours ....

Vetster86, Awesome for sure, and holy sheet.....did you have to off the inner well in the hood? Somebody asked you about power...I am sure it's making plenty!!

steve1ph2

man that intake looks fast. what does that cost?

skateparkdave

Man thats right, I totally forgot about having to drill the hole inside the pipe on my 2149's. I've slept since then and probably had more than a few too many than I should've since then.

Yeah, your not kidding, Vetster86's set up is awesome too as well as several others on this thread. Makes me motivated to work on mine.

LD85

Hairmetal_still_rox!

Looking good keep em coming everyone !!

vetster86

[QUOTE=mseven]
Vetster86, Awesome for sure, and holy sheet.....did you have to off the inner well in the hood? Somebody asked you about power...I am sure it's making plenty!!

mseven, that has to be one the best looking mini-rams I have seen............just awesome
Still have the upper wheel well, just had to do some mods to make it work. (got the wheel well mod kit from Greg at Blowerworks).
It seems to have some pretty good power, but I have not opened it up yet. Will be going for a tune on the dyno next week, I will post the HP/TQ numbers then.

mseven

Thanks for the kind words
Just from that shot it looks like some "whittrling" would be neccessary.
Yeah, I 'd like to hear the numbers, I'm sure it will put down some serious power......The only thing I see would be keeping the tires from peeling off the rims

adi4

Here you go











.

mos90

this is last years setup.

Jloshotz

LD85

Old Skewl
and many thousands of $$$$ ago,
in a garage far, farrr away!