Need a stock Vette 1989 - 1227165 bin

[conv90]

I realizing that I have some knowledge on my 90 vette ....SD 8D...

nothing about '165.
I need to tune a 89 vette
First: is a 89 vette a 6E ??
is it a 16Kb?
could I burn an Half 29c256 (32kb) ?

I need an Auto bin .. which one? AJUL, APIU, AUJN ANYX...
Please help me also to find the correct definition file for Tunerpro...
Thanks
-Beppe-

[convas]

Not 100% sure but I beleive the 89' auto vett bin is ARAP you can pick one up from the moates site.
You should be fine with the 29c256 with the correct offset


File Size Chip Buffer Start -> End Chip Start -> End
4k (4096) AT29C256 000000 -> 000FFF 007000 -> 007FFF
16k (16384) AT29C256 000000 -> 003FFF 004000 -> 007FFF
32k (32768) AT29C256 000000 -> 007FFF 000000 -> 007FFF
4k (4096) 27SF512 000000 -> 000FFF 00F000 -> 00FFFF
16k (16384) 27SF512 000000 -> 003FFF 00C000 -> 00FFFF
32k (32768) 27SF512 000000 -> 007FFF 008000 -> 00FFFF


56k (57344) 27SF512 000000 -> 00DFFF 002000 -> 00FFFF
64k (65536) 27SF512 000000 -> 00FFFF 000000 -> 00FFFF

[rodj]

Originally Posted by conv90

Please help me also to find the correct definition file for TunerPro

Beppe
The definition files are here under $6E
http://tunerpro.markmansur.com/downloadBinDefs.htm

3 common '165 bins including ARAP here
http://tunerpro.markmansur.com/download/bins/GM/

[conv90]

Thanks, I am with a doubt only because even the ARAP is with the TCC parameteres near to 30-35 mph to activate the TCC.
It's not a bit lower???

Another question... Is there a Cylinder volume parameter??
What if I have to tune a 383??
Thanks again
-Beppe-

[rodj]

Originally Posted by conv90

... Is there a Cylinder volume parameter?? What if I have to tune a 383??

Nothing I am aware of in $6E that accounts for engine / cyl size.
I put 30lb injectors in my 383 and tuned to suit