FS: Parting out 91 C4 Conv. Including rare hardtop!
#1
Cruising
Thread Starter
Member Since: Nov 2023
Location: East Bay, SF, California
Posts: 10
Likes: 0
Received 3 Likes
on
3 Posts
Parting out 91 C4 Conv. Including rare hardtop!
Hello Corvette enthusiasts of this forum! I have much appreciated the threads and wisdom found here! I am excited to continue on a path of tearing down/parting out my C4 Corvette I purchased a few months back. The following items are for sale, and smaller items could be shipped, if you're in NorCal I could also arrange delivery.
Hood, and aftermarket xenon headlights
Doors (glass operates well on both, a bit slower on passenger side)
Dash pieces, gauge cluster, radio, all interior parts (minus the seats)
RARE factory hardtop, see pics, looks so great on these convertibles!
Front and rear fenders, body panels, rear tail lights, speakers, fuel tank
The wheels/tires, stock brakes, exhaust system, radiator assembly, ECU/computer, AC parts will all be available later on, in a few months perhaps.
ALL PRICES NEGOTIABLE, lets chat, let me know what you need! Thanks for looking!
Patrick
Hood, and aftermarket xenon headlights
Doors (glass operates well on both, a bit slower on passenger side)
Dash pieces, gauge cluster, radio, all interior parts (minus the seats)
RARE factory hardtop, see pics, looks so great on these convertibles!
Front and rear fenders, body panels, rear tail lights, speakers, fuel tank
The wheels/tires, stock brakes, exhaust system, radiator assembly, ECU/computer, AC parts will all be available later on, in a few months perhaps.
ALL PRICES NEGOTIABLE, lets chat, let me know what you need! Thanks for looking!
Patrick
The following users liked this post:
jimstem (11-13-2023)
#2
What’s the scoop on the car. Looks to nice to be parting out. Or is the driver side gone from a side swipe?
The following users liked this post:
Hit Man X (11-03-2023)
#3
Instructor
He is in CA, so maybe will not pass smog easily?
I am looking for J55 aka HD/13" front calipers with brackets if you have them.
I am looking for J55 aka HD/13" front calipers with brackets if you have them.
#4
Cruising
Thread Starter
Member Since: Nov 2023
Location: East Bay, SF, California
Posts: 10
Likes: 0
Received 3 Likes
on
3 Posts
more info!
Thanks for the messages guys, let me elaborate re: your questions.
Yes! The car is in great shape, runs fine. And has passed SMOG, it has all the stock exhaust equipment on it. There are some scratches and imperfections in the paint on the door and rooftop, and a bit around the right rear fender.
I bought it a few months ago knowing I was gonna do this project tear down. It has 135k on it, has been in CA its whole life and has lots of receipts! It was the perfect car what I need. It will be hard to tear it apart, cause its so gorgeous, but I'm excited for my new metal work to be put atop this chassis. I will be welding a roll cage in, adding a fuel cell, stripping the interior and a terminator wiring kit for the engine, etc.
Yes! The car is in great shape, runs fine. And has passed SMOG, it has all the stock exhaust equipment on it. There are some scratches and imperfections in the paint on the door and rooftop, and a bit around the right rear fender.
I bought it a few months ago knowing I was gonna do this project tear down. It has 135k on it, has been in CA its whole life and has lots of receipts! It was the perfect car what I need. It will be hard to tear it apart, cause its so gorgeous, but I'm excited for my new metal work to be put atop this chassis. I will be welding a roll cage in, adding a fuel cell, stripping the interior and a terminator wiring kit for the engine, etc.
The following users liked this post:
yakmastermax (11-03-2023)
#9
Le Mans Master
The following 2 users liked this post by Cruisinfanatic:
Sabre34 (03-03-2024),
yakmastermax (11-04-2023)
#10
Cruising
Thread Starter
Member Since: Nov 2023
Location: East Bay, SF, California
Posts: 10
Likes: 0
Received 3 Likes
on
3 Posts
Ah, thanks Cruisinfanatic, I was not aware of that. Below are listed prices for each item:
Hood = 300
Aftermarket xenon headlights = 150
Doors (glass operates well on both, a bit slower on passenger side) = 200 per door
Dash pieces, gauge cluster, radio, all interior parts (minus the seats) =450
RARE factory hardtop, see pics, looks so great on these convertibles! = 2000
Front fenders = 300 a side
Rear fenders = 300 a side
Rear tail lights = 250
Speakers = 50
Hood = 300
Aftermarket xenon headlights = 150
Doors (glass operates well on both, a bit slower on passenger side) = 200 per door
Dash pieces, gauge cluster, radio, all interior parts (minus the seats) =450
RARE factory hardtop, see pics, looks so great on these convertibles! = 2000
Front fenders = 300 a side
Rear fenders = 300 a side
Rear tail lights = 250
Speakers = 50
The following users liked this post:
yakmastermax (11-04-2023)
#13
Drifting
Afternoon, I'm looking for tonneau latch bits. Particularly the plastic handle for manual release. It is also what the cable attaches to for the auto release. Assuming you are not keeping any of the body work?
Thanks!
Thanks!
#16
Cruising
Thread Starter
Member Since: Nov 2023
Location: East Bay, SF, California
Posts: 10
Likes: 0
Received 3 Likes
on
3 Posts
Hi Scott, Ah no I don't have that piece, sorry. I haven't been able to get the luaggage carrier off yet (sorry for the delay) the teardown hasn't happened yet, and with rain in the forecast I'm gonna wait to remove that once I can get the car into my buddy's garage. Once I do, I will let you know