FS: Front End parts
02-17-2018, 05:27 PM
#1
Racer
Thread Starter
Front End parts
Steering rack is from 1984 and has less than 1000 miles on it. 100. obo
A-arms from 1984. $200.pr. obo
breaks from 1984 Front and rear $50. pr. obo
leaf spring and member are from 1994 code on leaf spring is FHA. $100.
https://www.corvetteforum.com/forums...1&d=1518906446
A-arms from 1984. $200.pr. obo
breaks from 1984 Front and rear $50. pr. obo
leaf spring and member are from 1994 code on leaf spring is FHA. $100.
https://www.corvetteforum.com/forums...1&d=1518906446
Last edited by frankinvett84; 02-18-2018 at 06:19 PM.
02-28-2018, 02:00 PM
#9
bump...
- according to the factory parts manual, 1984-1987
A arm assemblies are the same part number - 14067598 (RH) and 14067597 (LH). there is one oddity though, Z51 assemblies are stamped accordingly (lower A-arm, bottom side near the ball joint), but seem to have the same part number as non-Z51 units. that puzzles me. if you are rebuilding the U/L arms, and as long as all bushing and ball joints are the same right to left, the base A-arm casting is common across the board. someone mentioned that Z51 cars got different bushings, but if that's the case, the general would have assigned a different and unique assembly part number. it could be that the Z51 stamping is only an RPO suspension identifier and has nothing to do with the A-arm assemblies at hand. who knows? steering knuckles are an altogether different story...
- according to the factory parts manual, 1984-1987A arm assemblies are the same part number - 14067598 (RH) and 14067597 (LH). there is one oddity though, Z51 assemblies are stamped accordingly (lower A-arm, bottom side near the ball joint), but seem to have the same part number as non-Z51 units. that puzzles me. if you are rebuilding the U/L arms, and as long as all bushing and ball joints are the same right to left, the base A-arm casting is common across the board. someone mentioned that Z51 cars got different bushings, but if that's the case, the general would have assigned a different and unique assembly part number. it could be that the Z51 stamping is only an RPO suspension identifier and has nothing to do with the A-arm assemblies at hand. who knows? steering knuckles are an altogether different story...
Last edited by Joe C; 02-28-2018 at 02:25 PM.
03-01-2018, 10:23 PM
#10
Instructor
Member Since: Sep 2006
Location: toledo ohio
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Steering rack is from 1984 and has less than 1000 miles on it. 100. obo
A-arms from 1984. $200.pr. obo
breaks from 1984 Front and rear $50. pr. obo
leaf spring and member are from 1994 code on leaf spring is FHA. $100.
https://www.corvetteforum.com/forums...1&d=1518906446
A-arms from 1984. $200.pr. obo
breaks from 1984 Front and rear $50. pr. obo
leaf spring and member are from 1994 code on leaf spring is FHA. $100.
https://www.corvetteforum.com/forums...1&d=1518906446
shipping to 43615
03-06-2018, 06:38 PM
#12
Racer
Thread Starter
Sorry . Break calipers and anti-sway bar are still for sale ..All other parts are sold..will post them by separately on new thread. thanks for all offers
05-01-2018, 02:31 PM
#13
Racer
Steering rack is from 1984 and has less than 1000 miles on it. 100. obo
A-arms from 1984. $200.pr. obo
breaks from 1984 Front and rear $50. pr. obo
leaf spring and member are from 1994 code on leaf spring is FHA. $100.
https://www.corvetteforum.com/forums...1&d=1518906446
A-arms from 1984. $200.pr. obo
breaks from 1984 Front and rear $50. pr. obo
leaf spring and member are from 1994 code on leaf spring is FHA. $100.
https://www.corvetteforum.com/forums...1&d=1518906446
marty69003@aol.com