1996 collectors edition part out
#61
Burning Brakes
Member Since: Apr 2001
Location: Toronto Ontario
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '13
Looking for the rubber hose from the air pump to the left header check valve.
Do you have?
Also in the radiator air inlet at the bottom of the rad when viewed from front, there are two small plastic deflectors attached with two or three fir tree plugs per side. These pieces are maybe 3 inches by three inches and thin black vinyl/plastic. They keep air from entering the bumper cover and keep airflow into the rad.
Thanks
Do you have?
Also in the radiator air inlet at the bottom of the rad when viewed from front, there are two small plastic deflectors attached with two or three fir tree plugs per side. These pieces are maybe 3 inches by three inches and thin black vinyl/plastic. They keep air from entering the bumper cover and keep airflow into the rad.
Thanks
#68
Instructor
Do you still have the LT4 Knock (ESC) Module # 16214681?
Is that the factory solid roof panel?
Did the 96 have FX3? If so I need the seat switch to the right of the FX3 switch (I have the # here somewhere).
32955 for shipping.
Thanks
Toby
Is that the factory solid roof panel?
Did the 96 have FX3? If so I need the seat switch to the right of the FX3 switch (I have the # here somewhere).
32955 for shipping.
Thanks
Toby
#72
Racer
How much for the ECM?
#77
Cruising
Top
[QUOTE=hep1966;1587176077]I have a "like-new" glass top but a previous owner removed the hardware and weatherstrips. Not easily seen in the pictures but the rear mount hardware is also missing.
Do u still have top and if so how much and what is shipping cost to 17402?
Do u still have top and if so how much and what is shipping cost to 17402?