F/S: L98 Cold Air Intake (CAI)
03-10-2012, 12:33 PM
#1
Racer
Thread Starter
Member Since: Nov 2002
Location: Stillwater OK, Fun City USA
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
F/S: L98 Cold Air Intake (CAI)
This is commonly called an upside down intake. It was made by Performance Automotive International. I think I bought it from TPIS or Summit Racing, a really long time ago! It normally came with a cut ZR1 lid but I opted for the ram air lid. It requires your radiator shroud be cut but I will provide that and you can keep yours intact. It will also come with a ZR1 sized K&N.
I modified it a bit, I was using speed density so I did not need a MAF. I also drilled and tapped it for an IAT relocation kit and a NOS fogger nozzle (see top pic), both will need to be plugged or reused in kind.
I know for sure it fits an '86 and visually appears as though it would also fit an '85. Beyond that I am not sure but I would think any L98 with a vertical radiator should accept it as well.
I think $150 plus shipping is probably fair. The ZR1 K&N is worth $75 new.
I modified it a bit, I was using speed density so I did not need a MAF. I also drilled and tapped it for an IAT relocation kit and a NOS fogger nozzle (see top pic), both will need to be plugged or reused in kind.
I know for sure it fits an '86 and visually appears as though it would also fit an '85. Beyond that I am not sure but I would think any L98 with a vertical radiator should accept it as well.
I think $150 plus shipping is probably fair. The ZR1 K&N is worth $75 new.
Last edited by Fatt Vette; 03-10-2012 at 02:43 PM.
