Harland Sharp roller rockers, Comp Cams beehive spring setup
#1
Advanced
Thread Starter
Member Since: Apr 2008
Location: Rio Rancho NM
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Harland Sharp roller rockers, Comp Cams beehive spring setup
EDIT - had the wrong part # listed, these are not the offset rockers. correct # is S1003
Complete set of Harland Sharp 1.65:1 full roller rockers in very nice shape, part # S1003 $200 obo
Complete new in box Comp Cams beehive spring setup for stock l98 aluminum head:
Comp Cams Beehive springs pn# 26918-16
Comp Cams steel retainers pn# 795-16
Comp Cams valve locks pn# 611-16
Comp Cams spring cup set pn# 4705-16
all parts never out of the box except for the springs, minor surface rust as seen in the pics. $175 + shipping
pics:
http://s751.photobucket.com/albums/x...and%20springs/
Complete set of Harland Sharp 1.65:1 full roller rockers in very nice shape, part # S1003 $200 obo
Complete new in box Comp Cams beehive spring setup for stock l98 aluminum head:
Comp Cams Beehive springs pn# 26918-16
Comp Cams steel retainers pn# 795-16
Comp Cams valve locks pn# 611-16
Comp Cams spring cup set pn# 4705-16
all parts never out of the box except for the springs, minor surface rust as seen in the pics. $175 + shipping
pics:
http://s751.photobucket.com/albums/x...and%20springs/
Last edited by bwv505; 01-15-2011 at 06:18 AM. Reason: corrected part number
#2
Hi I tried to pm you, might be interested in spring parts. Please send your phone number to me at. turbotim23@hotmail.com Thanks Tim
#7
Advanced
Thread Starter
Member Since: Apr 2008
Location: Rio Rancho NM
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
I am glad you asked this question, I was researching both the heads and the rocker arms and found that I had put the part number for the offset rocker rather than the standard one. The actual part number for what I have is S1003 and I verified it takes the 3/8 stud.
On the AFR site I was looking at the 195 head, which seems to be the most common and it comes with 3/8 studs. to buy the studs seperate if you had the smaller ones should be around $20.00
On the AFR site I was looking at the 195 head, which seems to be the most common and it comes with 3/8 studs. to buy the studs seperate if you had the smaller ones should be around $20.00