Holly stealth ram intake for sell modded to FIT under C4 hood.
08-19-2010, 07:15 PM
#1
Drifting
Thread Starter
Holly stealth ram intake for sell modded to FIT under C4 hood.
SOLD!!!!!!!!!!!!!!!!!
I got this from user Ch@0s It has been modded and ported to fit under stock c4 hood.
Comes with fuel rails fuel lines fuel reg tb spacer New 32lb Bosch 3 injectors by Jon @ FIC Small dizzy cap and distributor shaft with a billet gear.
Reason im Abandoning my build is Eh Ls1 camaro seems a better way to go since i also need a family car.
Ok to install this is very easy You will need everything above Your stock TB will work.
You need a tpis water neck an msd blaster coil fuel fittings and a hei harness.
Then simply unbolt your stock tpi bolt this on install dizy cap and the harness into a blaster coil and hook up your water neck.
You will need some fuel line fittings which jon @ fic can get you there very cheap.
Everything is there so start your car up and feel why the HSR is the most powerful intake out there and a ported one well that makes it even more powerful!
This intake is the real deal!! It will fit perfectly under the hood Ch@0s had this installed on his car a 1990 L98 c4 corvette.
An Hsr Is going to give you more hp/tq per $ spent then any other mod.
It is also going to enhance everything you add headers heads cam etc.
For the L98 this is the best intake per $ spent hp/tq.
Your stock power band on an L98 with your TPI dies at 4500rpms...
Well with this intake it will make your peak hp @ 6100rpms = 6300rpms
And Tq at 5500rpms = 5800 rpms.
Not only is it an instant bolt on 35 = 60hp /tq it gives you 2k rpms more power per gear.
Which should be enough to knock atleast a second off your 1/4 if not more.
For 750$ what else can give this kind of improvement to your performance?
This intake at this price is a no brainer!!
900$ + shipping takes it all. Or 750$ + shipping without injectors.
PRICE FOR ONE WEEK ONLY 650$ + SHIPPING FOR INTAKE ONLY
PRICE FOR ONE WEEK ONLY 750$ + SHIPPING FOR INTAKE AND INJECTORS
tHIS ENDS SUNDAY AT 11.59PM
I got this from user Ch@0s It has been modded and ported to fit under stock c4 hood.
Comes with fuel rails fuel lines fuel reg tb spacer New 32lb Bosch 3 injectors by Jon @ FIC Small dizzy cap and distributor shaft with a billet gear.
Reason im Abandoning my build is Eh Ls1 camaro seems a better way to go since i also need a family car.
Ok to install this is very easy You will need everything above Your stock TB will work.
You need a tpis water neck an msd blaster coil fuel fittings and a hei harness.
Then simply unbolt your stock tpi bolt this on install dizy cap and the harness into a blaster coil and hook up your water neck.
You will need some fuel line fittings which jon @ fic can get you there very cheap.
Everything is there so start your car up and feel why the HSR is the most powerful intake out there and a ported one well that makes it even more powerful!
This intake is the real deal!! It will fit perfectly under the hood Ch@0s had this installed on his car a 1990 L98 c4 corvette.
An Hsr Is going to give you more hp/tq per $ spent then any other mod.
It is also going to enhance everything you add headers heads cam etc.
For the L98 this is the best intake per $ spent hp/tq.
Your stock power band on an L98 with your TPI dies at 4500rpms...
Well with this intake it will make your peak hp @ 6100rpms = 6300rpms
And Tq at 5500rpms = 5800 rpms.
Not only is it an instant bolt on 35 = 60hp /tq it gives you 2k rpms more power per gear.
Which should be enough to knock atleast a second off your 1/4 if not more.
For 750$ what else can give this kind of improvement to your performance?
This intake at this price is a no brainer!!
900$ + shipping takes it all. Or 750$ + shipping without injectors.
PRICE FOR ONE WEEK ONLY 650$ + SHIPPING FOR INTAKE ONLY
PRICE FOR ONE WEEK ONLY 750$ + SHIPPING FOR INTAKE AND INJECTORS
tHIS ENDS SUNDAY AT 11.59PM
Last edited by Jamie Lennartson; 08-21-2010 at 04:02 PM.
08-19-2010, 08:54 PM
#3
Drifting
Thread Starter
Depends on what power you want to make.
If you go with a full top end build heads cam rr's and are makeing 400+hp you need them.
If you just plan on slaping this on and nothing else you dont need them.
These injectors are brand new still in box i payed 194$ for them a month ago and now only asking 100$ with the package.
If you go with a full top end build heads cam rr's and are makeing 400+hp you need them.
If you just plan on slaping this on and nothing else you dont need them.
These injectors are brand new still in box i payed 194$ for them a month ago and now only asking 100$ with the package.
08-20-2010, 03:08 PM
#6
Drifting
Thread Starter
After that time is over it goes back to the other prices.
And yes it should knock off that much time...
08-20-2010, 04:10 PM
#7
Bump for a great price considering all the fab work is done that usually cost another $500 from most shops to do it. Plus the small cap dizzy and injectors.
Anyone going to FI, or upgrading FI this is an awesome intake in all performance aspects, and ease to install.
Anyone going to FI, or upgrading FI this is an awesome intake in all performance aspects, and ease to install.
08-21-2010, 11:02 AM
#9
Melting Slicks
I will take it without injectors for $650. I will PM you as well. We are not too far from each other as I live in NC (27979) just below the VA line so shipping should not be too terrible.
08-22-2010, 10:05 AM
#15
Congrats.. Buyer got a great deal. Please let us know how it goes on the install and difference in performance.
Last edited by twin540; 08-22-2010 at 10:07 AM. Reason: purple
08-24-2010, 09:43 PM
#16
Instructor
Member Since: Nov 2007
Location: greenwood lake new york
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
darn darn darn
oh well ,story of my life,a day late and a dollar short....well not a dollar short but a day flippin late!!!! good luck with the intake and let us kno how it goes
08-25-2010, 10:37 AM
#17
Melting Slicks
Intake and dist. arrived yesterday in great condition. Once I get the rest of the parts needed for install it will be going on Jen's 87. Great seller, excellent communication.
08-25-2010, 02:57 PM
#18
Drifting
Thread Starter
