complete black tag, spec steel flywheel look inside
#1
Safety Car
Thread Starter
complete black tag, spec steel flywheel look inside
Will be available in January 2010
stock Valero clutch,
new Billet spec 20lb SM flywheel,
brake and clutch pedal assembly,
No Console plate keeping it,
ZF DOC shifter,
Bell housing,
Black Tag,
hydralics, master and slave,
dust plate,
Yoke with entire drive shaft,
shift boot,
great condition ****...
whatever associated with the Stick car
2500.00 plus shipping
or
Will separate
Black Tag~110,000 miles
20 lb SPEC steel FW 3000 miles,
stockclutch, and bearing 35,000 miles
New ZFDOC short shifter 5,000 miles
PM please
stock Valero clutch,
new Billet spec 20lb SM flywheel,
brake and clutch pedal assembly,
No Console plate keeping it,
ZF DOC shifter,
Bell housing,
Black Tag,
hydralics, master and slave,
dust plate,
Yoke with entire drive shaft,
shift boot,
great condition ****...
whatever associated with the Stick car
2500.00 plus shipping
or
Will separate
Black Tag~110,000 miles
20 lb SPEC steel FW 3000 miles,
stockclutch, and bearing 35,000 miles
New ZFDOC short shifter 5,000 miles
PM please
Last edited by slickfx3; 02-10-2010 at 03:39 PM.
#4
Safety Car
Thread Starter
yes i think i will part the package, but it's going to be a few months, i am putting the pieces together for the automatic ( in my mind) at this time and doing research, the the trans will need to be rebuilt and beefed up,so that will take some time...
when everything is out of the car you can have it, i found a way to ship it cheap too, it fits in a flat rate box or 2
when everything is out of the car you can have it, i found a way to ship it cheap too, it fits in a flat rate box or 2
Last edited by slickfx3; 11-14-2009 at 09:47 PM.
#5
Melting Slicks
Member Since: Oct 2006
Location: In a van down by the river! Florida
Posts: 2,314
Likes: 0
Received 3 Likes
on
2 Posts
Fantastic to hear!
My vette is almost undrivable the clutch is so bad, and I just don't have the funds to replace it with new, so this will be perfect.
Thank you! Let me know the cost when it comes time, and let me know if theres anything I can do to help out with the swap.
~Rich
My vette is almost undrivable the clutch is so bad, and I just don't have the funds to replace it with new, so this will be perfect.
Thank you! Let me know the cost when it comes time, and let me know if theres anything I can do to help out with the swap.
~Rich
#6
Safety Car
Thread Starter
Flat rate is going to be around 20 to 24 bucks so that's good.
2 boxes one for the FW and the other for the Valero clutch,
the pilot bearing in one of those fluted ones,that i bought, it's new, if my mechanic put it in and did put something else in and i can have it taken out without scratching it it's yours too...
what you you think the setup you need is worth to you? I can set that aside and assign a value on a presale, this would help with my budgeting for the swap...
2 boxes one for the FW and the other for the Valero clutch,
the pilot bearing in one of those fluted ones,that i bought, it's new, if my mechanic put it in and did put something else in and i can have it taken out without scratching it it's yours too...
what you you think the setup you need is worth to you? I can set that aside and assign a value on a presale, this would help with my budgeting for the swap...
Last edited by slickfx3; 11-15-2009 at 12:15 PM.
#8
Safety Car
Thread Starter
coming out this month for sure all
"for sale" will separate it down to the last washer.....
NO RESONABLE OFFER REFUSED before going to FeeBay
"for sale" will separate it down to the last washer.....
NO RESONABLE OFFER REFUSED before going to FeeBay
Last edited by slickfx3; 01-10-2010 at 02:50 PM.
#9
Le Mans Master
Is there anything with the transmission? All gears work correctly?
If so I would be interested in all the parts except these:
brake and clutch pedal assembly,
Console plate with FX3 switch
What would the total plus shipping to a business address zip 30096 be?
Could we keep in the $2k range?
If so I would be interested in all the parts except these:
brake and clutch pedal assembly,
Console plate with FX3 switch
What would the total plus shipping to a business address zip 30096 be?
Could we keep in the $2k range?
#11
Le Mans Master
ZFDOC has "crating" instructions, IIRC its basically empty the fluid and strap it securely to a pallet. The reason why I gave you the work zip code is that it is easier to truck ship to a place with a loading dock. The company I work for has a really nice loading dock and a way I can roll it out of the warehouse. It would be more expensive to ship it to my house because they would need a liftgate. Check out Bob's (zfdoc) website.
If you want you could ship the smaller parts first to my house, they don't need to be shipped by truck. I always pay with postal money orders, bunch of folks here can tell you that.
It doesn't matter if its January or February - I'm not in a hurry. I only have an occasional issue getting into 2nd and its been that way for three years now. I just skip from 1 to 3 without a problem.
If you want you could ship the smaller parts first to my house, they don't need to be shipped by truck. I always pay with postal money orders, bunch of folks here can tell you that.
It doesn't matter if its January or February - I'm not in a hurry. I only have an occasional issue getting into 2nd and its been that way for three years now. I just skip from 1 to 3 without a problem.
#13
Safety Car
Thread Starter
getting closer, no cigar yet, auto trans is on the bench,
http://www.propowertransmissions.com/contact-us.html
when I get it, it's going in, and I suppose the old stuff will be out before the other stuff goes in....
http://www.propowertransmissions.com/contact-us.html
when I get it, it's going in, and I suppose the old stuff will be out before the other stuff goes in....
#14
Safety Car
Thread Starter
ttt, I will sell it as at a very affordable price, you will be surprise make me an offer PM prefered.......
BLACK TAG!
I will separate....
parts coming out in a week or so.....
BLACK TAG!
I will separate....
parts coming out in a week or so.....
Last edited by slickfx3; 01-31-2010 at 12:11 PM.