FS: Complete TPI System SLP
#1
Instructor
Thread Starter
Member Since: Dec 2007
Location: Hilliard OH
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
FS: Complete TPI System SLP
The following items are a complete bolt-on TPI setup for SBC. My motor produced 493lb-ft & 380hp with this setup in my '85. I am switching to a carburetor, so all the TPI stuff must go. I want to sell the whole thing as a package if possible.
Edelbrock High Flow TPI Intake - Larger ports to match SLP Runners. Bolt holes are slotted to work with both early & late non-vortex heads. SOLD!
SLP Cast aluminum Intake Runners (Polished) - Port matched to Edelbrock base. SOLD!
Upper plenum (Polished) - Ported to match the SLP Runners. SOLD!
Stock Fuel Injectors w/ fuel rails - Injectors Blue Printed by TPIS. SOLD!
Adjustable Fuel Pressure Regulator. SOLD!
Stock 48mm Throttle Body w/ air foil added. SOLD!
Stock Mass Airflow Sensor w/ screens removed for better flow.
Stock distributor for use with TPI.
Complete engine wiring harness from 1985 Vette for fuel injection + all sensors. SOLD!
Complete dash wiring harness for 1985 Vette, including ECM.
The cam I used for this combo is also available. PM me for specs and price.
I will consider trades for a 4150 sreies 750cfm carb and a Victor Jr intake and some cash.
Thanks,
BeerMan
86 Rag Top
85 Coupe
Edelbrock High Flow TPI Intake - Larger ports to match SLP Runners. Bolt holes are slotted to work with both early & late non-vortex heads. SOLD!
SLP Cast aluminum Intake Runners (Polished) - Port matched to Edelbrock base. SOLD!
Upper plenum (Polished) - Ported to match the SLP Runners. SOLD!
Stock Fuel Injectors w/ fuel rails - Injectors Blue Printed by TPIS. SOLD!
Adjustable Fuel Pressure Regulator. SOLD!
Stock 48mm Throttle Body w/ air foil added. SOLD!
Stock Mass Airflow Sensor w/ screens removed for better flow.
Stock distributor for use with TPI.
Complete engine wiring harness from 1985 Vette for fuel injection + all sensors. SOLD!
Complete dash wiring harness for 1985 Vette, including ECM.
The cam I used for this combo is also available. PM me for specs and price.
I will consider trades for a 4150 sreies 750cfm carb and a Victor Jr intake and some cash.
Thanks,
BeerMan
86 Rag Top
85 Coupe
Last edited by bspvette; 01-14-2009 at 06:06 PM.
#6
Instructor
Thread Starter
Member Since: Dec 2007
Location: Hilliard OH
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Sorry. I decided to split it apart. I just sold the Intake, Runners, Plenum, TB, and Adjustable Fuel Regulator. Other items are still available. See original post for those.
Thanks,
BeerMan
Thanks,
BeerMan
#8
Instructor
Thread Starter
Member Since: Dec 2007
Location: Hilliard OH
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Since my original post, I have found out that both the dash and engine wiring harness have had some pieces cut out. I can't tell you how much, but it's probably all of the AC & polution stuff. So I would feel a little guilty asking much for it.
I would like $40 for the ECM. I'll throw in either wiring harness for free if you want to pay shipping.
I do have a complete 1986 dash wiring harness that you can have for $50. I don't know if that will work with the 85 ECM.
Thanks,
BeerMan
#11
Instructor
Thread Starter
Member Since: Dec 2007
Location: Hilliard OH
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts