Greenwood High Rise Hood and Louvers
#1
Greenwood High Rise Hood and Louvers and C4R Indy Wing (New) to go with them.
Have GR4 Greenwood High Rise Hood and 4 piece Louvers Set fresh from Greenwood Bought in April got offer on car (sold car) new owner doesn't want any street parts, gonna race.
I am adding the Indy Wing for C4R, buyer idin't want he's a mudder.
First:
Hood and Louvers
Both cost $900 you won't find any lower price (read further on) or I'll beat it. You can pick up in Vancouver, WA. or Ship on me.
Posting has changed, Please read below:
My reasoning, first they look great, second the hood comes down low enough between the headlights for forced air to throttle body connection for true ram air like the old mussle cars with a grill on the inlets. Fabricate a new two part snorkel/ maybe a filter (maybe something based on this and your set up like a goat, challenger, any of those two mini-scoop cars. Or just put a seal at the hood and fix a snorkel/filtered up to hood grilles. It would look good without using it for a scoop anyway.
Louvers of course purge engine compartment hot air and also have lower drain parts to keep water out of compartment. Finish is very fine/smooth on outside.
Of course you carbs guys already are thinking about different options.
The hood snorkel has been cut out by Greenwood (for those who don't know it's two piece, front tip is separate and not cutout. Well if you don't want the forced air option the front tip is not cut out. Bolts are included to secure hood. Did a practice fit and man does it look good. You might even be able to place some gages for the windshield in hood. (closed area) go to: LRH[=http:///http://www.greenwoodcorvettes.com/C4s/G383/G383silverabove.jpg[/URL] for details. Although its not very tall there. Been awhile since I setup links so you may have to cut and past link.
Due to buyer not wanting it it has now become available.
This wing comes roughed and needs smoothing and priming, comes with hardware, hell I think you might even be able to put a third brake light (for you 84 guys, (the skinny for a 96 or so if you wanted). Just removed from the box for inspection, thats all! Clears all areas of concern like gas cap, antenna. I've always liked the look of this one when I've seen it on the street.
All hardware and paperwork, none of these have been modified in anyway. I'll leave it up here for a while then try Ebay (I'm just past my 90 day restock at Ecklers, so this is the best way to get sold for me). Pics on-demand! I think these pieces in particular are the ones that make the "look" without changing the body lines too much, all C4R parts. So add what you want. Total new cost - ship around over $360 + $900 above, will sell ALL $1000 and I will ship to USA loc'n.
Sorry for any runon sentences or redo's on description.
Call (360) 253-6645 or email reliaserv@aol.com
Mark
Live in Vancouver, WA
I will be selling a lot of parts here soon sif your looking for something hard to find just ask!
I am adding the Indy Wing for C4R, buyer idin't want he's a mudder.
First:
Hood and Louvers
Both cost $900 you won't find any lower price (read further on) or I'll beat it. You can pick up in Vancouver, WA. or Ship on me.
Posting has changed, Please read below:
My reasoning, first they look great, second the hood comes down low enough between the headlights for forced air to throttle body connection for true ram air like the old mussle cars with a grill on the inlets. Fabricate a new two part snorkel/ maybe a filter (maybe something based on this and your set up like a goat, challenger, any of those two mini-scoop cars. Or just put a seal at the hood and fix a snorkel/filtered up to hood grilles. It would look good without using it for a scoop anyway.
Louvers of course purge engine compartment hot air and also have lower drain parts to keep water out of compartment. Finish is very fine/smooth on outside.
Of course you carbs guys already are thinking about different options.
The hood snorkel has been cut out by Greenwood (for those who don't know it's two piece, front tip is separate and not cutout. Well if you don't want the forced air option the front tip is not cut out. Bolts are included to secure hood. Did a practice fit and man does it look good. You might even be able to place some gages for the windshield in hood. (closed area) go to: LRH[=http:///http://www.greenwoodcorvettes.com/C4s/G383/G383silverabove.jpg[/URL] for details. Although its not very tall there. Been awhile since I setup links so you may have to cut and past link.
Due to buyer not wanting it it has now become available.
This wing comes roughed and needs smoothing and priming, comes with hardware, hell I think you might even be able to put a third brake light (for you 84 guys, (the skinny for a 96 or so if you wanted). Just removed from the box for inspection, thats all! Clears all areas of concern like gas cap, antenna. I've always liked the look of this one when I've seen it on the street.
All hardware and paperwork, none of these have been modified in anyway. I'll leave it up here for a while then try Ebay (I'm just past my 90 day restock at Ecklers, so this is the best way to get sold for me). Pics on-demand! I think these pieces in particular are the ones that make the "look" without changing the body lines too much, all C4R parts. So add what you want. Total new cost - ship around over $360 + $900 above, will sell ALL $1000 and I will ship to USA loc'n.
Sorry for any runon sentences or redo's on description.
Call (360) 253-6645 or email reliaserv@aol.com
Mark
Live in Vancouver, WA
I will be selling a lot of parts here soon sif your looking for something hard to find just ask!
Last edited by Mark84; 06-16-2005 at 12:45 AM. Reason: Buyer did not want with the car before I hadn't decided to sell so now I'm selling Wing too.
#7
Safety Car
Originally Posted by nonnivett
u got pm
http://forums.corvetteforum.com/show...5&page=1&pp=20
Hope all the issues are being resolved by all parties concerned......
#8
Originally Posted by LT4BUD
http://forums.corvetteforum.com/show...5&page=1&pp=20
Hope all the issues are being resolved by all parties concerned......
Hope all the issues are being resolved by all parties concerned......
#9
Pro
Member Since: Apr 2003
Location: South Lyon Michigan
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
I have the Greenwood hood scoop on my car and it is a great piece for looks or like in my case I needed an extra 2.5" of hood clearance.
How much do you want for the louvers?
How much do you want for the louvers?
#12
Sorry, little slow on this linkup stuff, but I put the Greenwood Site up to cut and p
Everything is still available including a new item, he passed on the Indy Wing. Please reread the post, all new, the hood is not that high it really looks as good as the pics. I know your worried about taking away your traditiondal lines but give it a chance, it really brings out some special one of a kind look. I wasn't aware of it but Greenwood set all kinds of speed records with there designs. Check out the site.
Thanks to all,
Mark for looking,
Coming up next, some Brand new MT street slicks with some older sawblades for race night! Coming at a good price too!
Thanks to all,
Mark for looking,
Coming up next, some Brand new MT street slicks with some older sawblades for race night! Coming at a good price too!
Last edited by Mark84; 06-15-2005 at 01:49 AM. Reason: Mispelling as usual