Wondering what part is missing for driver side vent?
#1
Wondering what part is missing for driver side vent?
I just received this dash vent Ive been needing but not sure what I'm missing for it to attach/bolt on, is it a bracket? If someone could attach a picture of what theirs looks like please.
Last edited by STARCRASHER22; 04-09-2024 at 06:51 PM.
#2
Screw goes through the hole to secure it in place.
The following users liked this post:
Cruisinfanatic (04-09-2024)
#5
Drifting
Member Since: May 2019
Location: Mid-Atlantic
Posts: 1,937
Received 672 Likes
on
438 Posts
2023 C4 of the Year Finalist - Unmodified
2022 C4 of the Year Finalist - Unmodified
2021 C4 of the Year - Unmodified Finalist
The thing is that there's no place to screw into.
Mine always pops out, too. That's how I know.
It does seem like some clip or something is missing that the screw would screw into. But I dunno. It's in the console in case I ever figure it out.
Mine always pops out, too. That's how I know.
It does seem like some clip or something is missing that the screw would screw into. But I dunno. It's in the console in case I ever figure it out.
#6
Of course there is a place to screw it in.
The following users liked this post:
Natty C (04-12-2024)
#8
Drifting
Member Since: May 2019
Location: Mid-Atlantic
Posts: 1,937
Received 672 Likes
on
438 Posts
2023 C4 of the Year Finalist - Unmodified
2022 C4 of the Year Finalist - Unmodified
2021 C4 of the Year - Unmodified Finalist
Yeah, I don't have that either.
Thanks for posting the picture, though. At least I see how it is supposed ot be anyway.
Thanks for posting the picture, though. At least I see how it is supposed ot be anyway.
#9
Drifting
Member Since: May 2019
Location: Mid-Atlantic
Posts: 1,937
Received 672 Likes
on
438 Posts
2023 C4 of the Year Finalist - Unmodified
2022 C4 of the Year Finalist - Unmodified
2021 C4 of the Year - Unmodified Finalist
I flipped through the FSM out of curiosity. Nothing in the diagrams. So that bracket must be embedded into the dash top itself.
Gonna have to fabricate your own and re-embed it. That's what I'm gonna do anyway...
Gonna have to fabricate your own and re-embed it. That's what I'm gonna do anyway...
Last edited by Natty C; 04-13-2024 at 05:53 PM.