Need Help With A Front Splitter - Miami Area
#1
Guest
Posts: n/a
Need Help With A Front Splitter - Miami Area
We are just about to make the mold for the new front splitter but need someone to bring by their 90-96 for a final trial fit of the prototype. If you want one of these I will make it worth your while to bring over your car. We just need it for about 40 minutes.
Call or text me if you are interested. 813-476-5638 Pat Scorzetti
Call or text me if you are interested. 813-476-5638 Pat Scorzetti
Last edited by American Hydrocarbon; 09-19-2013 at 06:14 PM. Reason: typo
#6
Racer
Hi Pat, is the splitter going to hang down lower than the stock front spoiler? Mine scrapes on some speed humps now, I would hate to have my new splitter torn off because it hangs down too low.
Mike
Mike
#7
Guest
Posts: n/a
I think Polo92 should address this question as he massaged it to a perfect fit on his car.
#8
Life Starts at 120 mph
Member Since: Jun 2012
Location: Upstate New York
Posts: 1,535
Received 185 Likes
on
118 Posts
NCM Lifetime Member
NCM Sinkhole Donor
Mike got the "Attention c4 spoilers buyers" thread. Polo92 took pic of it mounted. IMO it looks just about the same. But like Pat said, Polo92 can answer the question in detail. I think he measured and posted in that thread.
#9
Guest
Posts: n/a
As soon as the final fit on site is completed we will proceed with making the molds.
#11
Tech Contributor
I think it looks great however, I agree with even at stock height the stock air dam still scrapes driveways etc. Too bad it could not been raised about 1/2 inch to be an improvement over stock and not have to worry about damaging it in short order. Missed oppourtunity IMHO. I state this to not slam the project but address the real issue while its still in the prototype phase. Another option is to make a stock one or a short unit as two seperate options.
Last edited by Goldcylon; 09-23-2013 at 08:57 AM.
#15
Instructor
Member Since: Sep 2012
Location: Yukon OK
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
I have a Z51 car and the stock deflectors are 4 1/2" deep vers. the standard coups at
3 1/2" deep. Is the splitter going to be 4 1/2 for us Z51 guys or can that be a option
3 1/2" deep. Is the splitter going to be 4 1/2 for us Z51 guys or can that be a option