C4 Projector Headlights Only $750 and Free Shipping
#1
Former Vendor
Thread Starter
C4 Projector Headlights Only $750
C4 Corvette Projector Headlight Upgrade $750
Finally a high quality, reasonably priced headlight upgrade for C4 (1984-1996) Corvettes. If your tired of fixing headlight motors or just want better nighttime visibility from your C4, this is the upgrade for you. The headlamp System pictured is the result of two years of testing and improvements. We selected glass lens, 60 mm, Hella projector headlamps for our system because the quality and light output are second to none. Our system comes with everything you need for a seamless installation. We are always ready to answer questions about our products, so don’t hesitate to call or email. Mention where you saw us for a Forum Member Discount and FREE SHIPPING.
361-563-1043
rppcorvette@gmail.com
The Housings are made with Noryl GTX 830 (30% glass) plastic
The Mounting brackets are stamped aluminum
The Wiring Harnesses are weatherproof
Hardware is Stainless Steel
Nylon shims are provided for adjustment
Finally a high quality, reasonably priced headlight upgrade for C4 (1984-1996) Corvettes. If your tired of fixing headlight motors or just want better nighttime visibility from your C4, this is the upgrade for you. The headlamp System pictured is the result of two years of testing and improvements. We selected glass lens, 60 mm, Hella projector headlamps for our system because the quality and light output are second to none. Our system comes with everything you need for a seamless installation. We are always ready to answer questions about our products, so don’t hesitate to call or email. Mention where you saw us for a Forum Member Discount and FREE SHIPPING.
361-563-1043
rppcorvette@gmail.com
The Housings are made with Noryl GTX 830 (30% glass) plastic
The Mounting brackets are stamped aluminum
The Wiring Harnesses are weatherproof
Hardware is Stainless Steel
Nylon shims are provided for adjustment
Last edited by RPP_Corvette; 10-05-2012 at 07:12 PM.
#3
Race Director
Wow! You already bought a set for your C4 and need a set for your C3? What a great vendor supporter!
btw...FWIW, I wouldn't mind seeing a rear view of the vendor's car!
btw...FWIW, I wouldn't mind seeing a rear view of the vendor's car!
#4
Team Owner
Member Since: Aug 2005
Location: Riverside County Southern California
Posts: 34,988
Received 501 Likes
on
342 Posts
Co-winner 2020 C4 of the Year - Modified
2018 Corvette of Year Finalist
2017 C4 of Year
2016 C7 of Year Finalist
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20
Only $750
#7
#8
Former Vendor
Thread Starter
Anyone who wants something different or a similar product for another model, send an email to rppcorvette2@gmail.com and we will add you to the notification list for that product. This will also help us determine product demand and get good feedback for development.
We only have 12 sets left until we will need to make another run on the injection molds. Contact rppcorvette@gmail.com or 361-563-1043 to order and get a forum member discount.
We only have 12 sets left until we will need to make another run on the injection molds. Contact rppcorvette@gmail.com or 361-563-1043 to order and get a forum member discount.
#11
Former Vendor
Thread Starter
We started another thread for those that would like new products. It is mainly a brainstorming session for new parts and we have our new product email rppcorvette2@gmail.com for you to send your requests and to be notified with product developments.
#12
Former Vendor
Thread Starter
Only 10 sets left!!
We also made a couple strides with HID development. We have contacted NHSTA and have also arranged for testing of a new HID system. No guarantees, but we will keep everyone posted.
We also made a couple strides with HID development. We have contacted NHSTA and have also arranged for testing of a new HID system. No guarantees, but we will keep everyone posted.
#14
Former Vendor
Thread Starter
They take up slightly less space and they don't rotate, so you don't have to worry about clearance for moving parts.
#15
Former Vendor
Thread Starter
Less than 10 sets left. Yes we will make more, but it will take a few weeks.
Email rppcorvette@gmail.com today and
mention the forum for a forum member discount.
You can also call 361-563-1043 M-F 8-8 EST
Thanks,
Brandon
www.riceperformanceproducts.com
We are currently working on a C4 frame brace system at
http://forums.corvetteforum.com/c4-t...erested-2.html
Email rppcorvette@gmail.com today and
mention the forum for a forum member discount.
You can also call 361-563-1043 M-F 8-8 EST
Thanks,
Brandon
www.riceperformanceproducts.com
We are currently working on a C4 frame brace system at
http://forums.corvetteforum.com/c4-t...erested-2.html
#16
Former Vendor
Thread Starter
Fitment update:
We have recently discovered that some C4 hoods do not have the front mounting bar, particularly last year models. We are working on a fiberglass mounting piece that can be bonded on for these hoods to ensure a rigid mount for the headlight system. A bolt on bracket was considered, but we don't believe it would be as secure. Also, some first year hoods have slightly different side mounts that will work with the headlight system, but they will need a new hole drilled on one side. If you have one of these hoods and are interested in this system, send us an email and we will keep you updated.
Thanks,
Brandon
www.riceperformanceproducts.com
We have recently discovered that some C4 hoods do not have the front mounting bar, particularly last year models. We are working on a fiberglass mounting piece that can be bonded on for these hoods to ensure a rigid mount for the headlight system. A bolt on bracket was considered, but we don't believe it would be as secure. Also, some first year hoods have slightly different side mounts that will work with the headlight system, but they will need a new hole drilled on one side. If you have one of these hoods and are interested in this system, send us an email and we will keep you updated.
Thanks,
Brandon
www.riceperformanceproducts.com
#17
Melting Slicks
Member Since: Jun 1999
Location: Bowling Green KY
Posts: 2,948
Likes: 0
Received 21 Likes
on
16 Posts
Just ordered a set, can't wait!
Just talked to Brandon's wife Amy (nice lady) and they are on the way.
Once I have them painted and installed I'll post some pics.
Thanks so much Brandon for your persistence on these!
Just talked to Brandon's wife Amy (nice lady) and they are on the way.
Once I have them painted and installed I'll post some pics.
Thanks so much Brandon for your persistence on these!
#18
Former Vendor
Thread Starter
Only 7 sets left!!!!
We will make more, but it will be a few weeks minimum. Don't miss out on our forum member discount. Just mention this ad for an additional discount.
Thanks,
Brandon
www.riceperformanceproducts.com
We will make more, but it will be a few weeks minimum. Don't miss out on our forum member discount. Just mention this ad for an additional discount.
Thanks,
Brandon
www.riceperformanceproducts.com
#19
Former Vendor
Thread Starter
Here are some pictures of the headlights in red.
Thank you to Charles ....
No last name in the interest of preserving privacy.
Thanks,
Brandon
www.riceperformanceproducts.com
Thank you to Charles ....
No last name in the interest of preserving privacy.
Thanks,
Brandon
www.riceperformanceproducts.com
#20
I NEED THESE!!! After 2 months of working in my garage I just finished my Procharger on my 96 CE LT4.
The only issue is I was missing certain pieces and did my own modifying and changed some things for the install and my headlamp on the PASS side wont flip up due to clearance issues.
The only issue is I was missing certain pieces and did my own modifying and changed some things for the install and my headlamp on the PASS side wont flip up due to clearance issues.