When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
St. Jude Donor '09-'10-'11,'13-'14-'15-'16-'17-'18-'19-'20-'21,'22-'23-'24
Originally Posted by KEG64
If it is loose at the base of the mirror where it mounts to the door you will need to remove the door panel to tighten it.
Not that bad a job. There are access points in the door to stick an extention thru with (IIRC) a 10mm socket. I took the nuts off and put thread locker on them.
Not that bad a job. There are access points in the door to stick an extention thru with (IIRC) a 10mm socket. I took the nuts off and put thread locker on them.
07-08-2011, 01:53 PM
Not that bad a job. There are access points in the door to stick an extention thru with (IIRC) a 10mm socket. I took the nuts off and put thread locker on them.
