What have you done to your C4 today?
#1
Le Mans Master
Thread Starter
What have you done to your C4 today?
What did you do to/with your C4 today? doesn't have to be big.
Today I put the new (to me) fiberglass top on it only had to adjust one bracket.
I adjusted the pass wiper arm as it sat up too high on the windshield.
I put an undamaged wire mesh debris sheild over the wiper transmission access.
Thats it what'd you do?
P.S. anyday you read this post IS today.
Today I put the new (to me) fiberglass top on it only had to adjust one bracket.
I adjusted the pass wiper arm as it sat up too high on the windshield.
I put an undamaged wire mesh debris sheild over the wiper transmission access.
Thats it what'd you do?
P.S. anyday you read this post IS today.
#3
Pro
i put in a gauge pod today and got all the stuff run for it to be hooked up made a License plate holder didnt want to take the center filler plate out and since ohio says you must have 2 oh well y get the pic plan on doing more next week im off work all week plus fri sat sun is the springfield ohio swap meet pretty big so i hope to get a few deals over there i would post pics but i dont have a clue on how to
#10
Team Owner
Nothin'
It's sitting in the garage, covered.
I tuned up the wife's Honduh though.
First time in many, many years I had to set the points gap.
It's sitting in the garage, covered.
I tuned up the wife's Honduh though.
First time in many, many years I had to set the points gap.
#12
Today, I fixed my broken cigarette lighter. It works great now!
And I fixed the fiberglass on the underside of the hood, where I left a tool and caused a crack. I ended up cutting out about 6 inchs long, by 1 inch wide slit. Then I got fiberglass repair puddy, put it on there shaped it. Let it cure. Sanded it down so it's smooth. Put a second round of puddy on to hit some miss spots. Cured. Sanded, and painted.
Now it's like new.
And I fixed the fiberglass on the underside of the hood, where I left a tool and caused a crack. I ended up cutting out about 6 inchs long, by 1 inch wide slit. Then I got fiberglass repair puddy, put it on there shaped it. Let it cure. Sanded it down so it's smooth. Put a second round of puddy on to hit some miss spots. Cured. Sanded, and painted.
Now it's like new.
#14
Le Mans Master
Thread Starter
#16
Instructor
Member Since: Oct 2007
Location: Columbus OH
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Took it out to put air in the tires, had lunch, ran a few errands, then came home to watch Bump Day of the Indy 500. Since I had it in a show yesterday, there wasn't much else to do to the Vert.
Richard
Richard
#17
Race Director
Had mine out with the top down yesterday. The weather was not nice today so I applied leather conditioner to the seats, and cleaned the car.
#19
Corvette today
Well since you asked, i just got home after driving about 237 miles in the vette. we went to OCEAN CITY MD.for the annual hot rod cruise in. had a great time, saw many burnouts and hundreds of vettes!! i got around 23mpg. i saw more old drag cars with blowers sticking out of the hood then ever before.