>>QUESTION<< Interested in custom interior???
#1
Premium Supporting Vendor
Thread Starter
Member Since: Aug 2004
Location: ★ Performance Parts & Accessories ★ 1800 778 9898
Posts: 17,149
Received 279 Likes
on
222 Posts
St. Jude Donor '07-'08-'11-'12-'13-'14-'15-'16-'17
>>QUESTION<< Interested in custom interior???
Hi everyone,
I wanted to introduce something we have been offering for a while now....
Custom Interior Pieces with the look of Carbon Fiber & Burl Woods!
A perfect answer to enhance where you live when you drive! These are NOT stick on covers/overlays. The finish is applied to GM OEM parts. A guaranteed perfect fit.
We started with C6, then C5 and now I wanted to do it for the C4 interiors.
We were interested in your opinions. If interested, what pieces would you want to see done? We offer this finish in 8 colored carbon looking finishes and 2 beautiful woods!
Feel free to post and or email me direct:
ed@tkoperformance.com
Below is a little more about our products. Since we don't have any C4 parts done yet, we posted some C6 & C5 for ya.
________________________________________
Each item is put through a multi step process that achieves a stunning unique finish unlike anything around. Covered in a tough show quality polished gloss which gives it a deep 3 dimensional look.
The pieces look like they came from the factory.....only better .
We will offer 2 programs. (1) core exhange. or (2) Send in your parts and get them back
Available in 10 beautiful Finishes!
(From Top left to Right)Yellow, Dark Red, Dark Blue, Orange, Green, Silver, Gun Metal (Darker more subtle then regular Carbon look) Regular Carbon and Burl wood, Black Burl wood finishes.
For a little more $ Inquire about actual GM colors to match your exterior paint!
CHECK IT OUT
http://store.tkoperformance.com/cuinpi.html
http://store.tkoperformance.com/c5cuintrbuwo.html
Once you click on the above link, Be sure to click on the pictures 2-3 times to enlarge and get clear!
Looking forward to hearing from you. thank you.
Happy Holidays
Ed
I wanted to introduce something we have been offering for a while now....
Custom Interior Pieces with the look of Carbon Fiber & Burl Woods!
A perfect answer to enhance where you live when you drive! These are NOT stick on covers/overlays. The finish is applied to GM OEM parts. A guaranteed perfect fit.
We started with C6, then C5 and now I wanted to do it for the C4 interiors.
We were interested in your opinions. If interested, what pieces would you want to see done? We offer this finish in 8 colored carbon looking finishes and 2 beautiful woods!
Feel free to post and or email me direct:
ed@tkoperformance.com
Below is a little more about our products. Since we don't have any C4 parts done yet, we posted some C6 & C5 for ya.
________________________________________
Each item is put through a multi step process that achieves a stunning unique finish unlike anything around. Covered in a tough show quality polished gloss which gives it a deep 3 dimensional look.
The pieces look like they came from the factory.....only better .
We will offer 2 programs. (1) core exhange. or (2) Send in your parts and get them back
Available in 10 beautiful Finishes!
(From Top left to Right)Yellow, Dark Red, Dark Blue, Orange, Green, Silver, Gun Metal (Darker more subtle then regular Carbon look) Regular Carbon and Burl wood, Black Burl wood finishes.
For a little more $ Inquire about actual GM colors to match your exterior paint!
CHECK IT OUT
http://store.tkoperformance.com/cuinpi.html
http://store.tkoperformance.com/c5cuintrbuwo.html
Once you click on the above link, Be sure to click on the pictures 2-3 times to enlarge and get clear!
Looking forward to hearing from you. thank you.
Happy Holidays
Ed
__________________
Serving The Corvette Forum For 23 Years!!
Allow us to add you to the list of extremely satisfied customers.
Order Securely Online 24/7: http://tkoperformance.com/index.html
Feel Free To Contact Us By Phone: 1800 -778- 9898 Monday- Friday 9:00am to 4:30pm
Click Here: http://www.facebook.com/pages/TKO-Pe...e/367433626633
Serving The Corvette Forum For 23 Years!!
Allow us to add you to the list of extremely satisfied customers.
Order Securely Online 24/7: http://tkoperformance.com/index.html
Feel Free To Contact Us By Phone: 1800 -778- 9898 Monday- Friday 9:00am to 4:30pm
Click Here: http://www.facebook.com/pages/TKO-Pe...e/367433626633
Last edited by TKO Performance; 12-19-2007 at 10:02 PM.
#2
Thoroughly chapped
Member Since: Oct 2006
Location: If you're not angry, you're not paying attention
Posts: 20,355
Received 410 Likes
on
328 Posts
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16-'17
NCM Member '09
I guess I'll be teh fool that asks....is this going to be available for pre 90 C4's?
#4
Safety Car
I'd be fairly interested in a Leather trim package if available. No crazy colors, just a complement to the rest of the interior. Make it look less cheap.
To the parts you've made, they look beautifully done. That C6 interior with the regular carbon fiber looks like it really belongs there.
To the parts you've made, they look beautifully done. That C6 interior with the regular carbon fiber looks like it really belongs there.
#5
Looks like great stuff!!
I really like the color matched items.
As far as which interior pieces...Probably the center console piece, vents in passenger area and driver side and maybe door handle area. I'm not one to try and overdue something just enough to make it stand out and be different.
Nice product. Thanx for finally including the C4.
Whew..I just made the cut on that one
Gary
I really like the color matched items.
As far as which interior pieces...Probably the center console piece, vents in passenger area and driver side and maybe door handle area. I'm not one to try and overdue something just enough to make it stand out and be different.
Nice product. Thanx for finally including the C4.
Gary
#6
Le Mans Master
I'd eventually like to replace every single stinking piece of plastic with carbon fiber. The dash panels, door inserts, the plastic trim around the back hatch, the plastic trim under the halo, and the parking brake cover. I'd even like to have the leather upper dash pad changed out to carbon fiber if I could get a matte finish.
#8
Thoroughly chapped
Member Since: Oct 2006
Location: If you're not angry, you're not paying attention
Posts: 20,355
Received 410 Likes
on
328 Posts
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16-'17
NCM Member '09
Also, how will your kit address teh 'breadbox'? Will it eliminate teh dang eyesore?
#10
Premium Supporting Vendor
Thread Starter
Member Since: Aug 2004
Location: ★ Performance Parts & Accessories ★ 1800 778 9898
Posts: 17,149
Received 279 Likes
on
222 Posts
St. Jude Donor '07-'08-'11-'12-'13-'14-'15-'16-'17
trim
Looks like great stuff!!
I really like the color matched items.
As far as which interior pieces...Probably the center console piece, vents in passenger area and driver side and maybe door handle area. I'm not one to try and overdue something just enough to make it stand out and be different.
Nice product. Thanx for finally including the C4.
Gary
I really like the color matched items.
As far as which interior pieces...Probably the center console piece, vents in passenger area and driver side and maybe door handle area. I'm not one to try and overdue something just enough to make it stand out and be different.
Nice product. Thanx for finally including the C4.
Gary
As for including the C4...you bet. I dig the C4 but I was never a fan of the stick on finishes to snaz up the interior..Always though the aftermarket could have done better there. JMHO..
I'd eventually like to replace every single stinking piece of plastic with carbon fiber. The dash panels, door inserts, the plastic trim around the back hatch, the plastic trim under the halo, and the parking brake cover. I'd even like to have the leather upper dash pad changed out to carbon fiber if I could get a matte finish.
Good question. As I narrow down the parts we will do first, I'll get that all for you.
As you can see by our site the pricing is very reasonable. Plus we do what no one else does (including GM) We take everything apart (if there is chrome, leather..etc trim) so this way every thing does not get hit/sprayed.
Plus there are certain areas where it could look funky because of the angle (again one reason why GM or anyone does NOT do the gauge clusters) We take care of and address those areas..!
I'm looking forward to getting this off the ground. I really appreciate all of your help. Please keep the ideas/items that you want done first coming.I think you guys will like what we will are going to do..
Ed
#15
Premium Supporting Vendor
Thread Starter
Member Since: Aug 2004
Location: ★ Performance Parts & Accessories ★ 1800 778 9898
Posts: 17,149
Received 279 Likes
on
222 Posts
St. Jude Donor '07-'08-'11-'12-'13-'14-'15-'16-'17
To do these parts in real carbon, with all the compound & reverse curves, clips, attachments....it would cost a small fortune. Plus with real carbon a lot of resin is used which can yellow or crack over time.
I personally think in some cases our carbon finish line is even nicer then real anyway. The patterns are more perfect. No worry about imperfections in the fabric. (I know because we work with and have actual Carbon fiber pieces manufactured for us..)
We had them side by side at Carisle. hard to tell the difference.
What actually sways people towards this is the touch of metallic in some of the colors. The pictures do these pieces no justice.
I'll be putting all of this together soon and we can really get this rolling.
Along with the questions, let us know what you want done first..
Big thanks all
#16
Le Mans Master
The first two panels? the center console, and right dash panel (radio bezel?). Then I'd really like to have the panels around the back hatch area. I'd say those first, but I think it'd be really goofy with nothing else done yet.
#17
Team Owner
Member Since: May 2000
Location: Plantation Florida USAF(Retired) 1966-1990
Posts: 47,935
Received 4,505 Likes
on
3,590 Posts
U.S. Air Force
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
NCM Sinkhole Donor
Let me know when you make C4 products, PLZ!
#18
Burning Brakes
I would be interested. The rubber coating from the factory sucks. I would also like to see the pieces that go on the door around the window and mirror switches since the have the crappy rubber coating also.
#19
Melting Slicks
The quality looks very nice. If you get any C4 stuff done w/prices, be sure to post back. Some larger, HQ pics on your website would be great too, if you get them.