Hi guys. I have a pretty good sized custom intercooler for sale. It was custom built by a guy that previously outgrew the stock procharger one. The core measures 3.5" deep by 18" wide and 9" tall and is huge compared to the stock procharger one. It fits in between the hood mounting points. I believe that it is compatible with cars with the AC condenser. If you don't have AC, I think that there will be a little gap between the radiator and the intercooler depending on how you set things up.
I never ended up using it and I probably won't since I have electronics(ignition and alky injection controller & pump) and a trans cooler in the way of the install. It's a nice piece that would help out a bit, but my car is making plenty of power already.
New the unit cost $1200 to be built. I will also include a custom discharge tube fabricated by Nelson Racing that easily must have cost $250+ to fabricate. You can use it as a starting point on mating it up to your blower. I have $750 in it the intercooler alone. I'd like to get around $750 out of it but realize it's not a perfect world. I'm located in So Cal and if you're located locally, you're more than welcome to come check it out.
__________________
2004 Jaguar S type R. 4.2L V8 w/ Stiegemeier Snakebite Eaton M112 w/Alky Injection. H&R springs...
92 383, CNC'd LT4 top end, auto, custom vortech YSI trim, progressive alky kit, brembo 13.5's, magnesium speedline 18"'s with 275/335s, 7.30's@97 in the 1/8 (old combo)... The build up of an Low 10 second daily driver.
89 Saleen Clone with a 335" T trim'd blower motor. DFI, CNC'd victor jr's, vic 5.0. Was shooting for high 9's and 740 rwhp. Gone, but definately not forgotten...
Hi guys. I have a pretty good sized custom intercooler for sale.
Quote:
Originally Posted by dtamas
I'd like to make an offer. I have a question about fitment issue for an earlier C4. 501-580-6236
David,
This IC is going to be tough to modify to fit into a '88 vette. The radiator profile is different, and will require modifications to the IC and custom piping to the TB and from the blower.
Aaron
guys, here's some info on the shipping. The size of the package shipping is the main concern. I quoted the unit shipped to Miami. Since UPS goes by zones, I think this should be at least somewhat accurate. I quoted 50lbs packed and different measurements. I may be able to get it shipped at a lighter weight once packed but I figured 50 would be a conservative weight.
24 by 24 by 24 @ 50lbs - $67.15
26 by 26 by 26 @50 - $90.80
28 28 28 - $157
30 30 30 - $179.04
I'll try packing it up either tonight and tomorrow and see how small I can get it and what kind of weight we're dealing with. Sorry about the delays. Things have been super hectic. I ran a half marathon last weekend and I've been super busy at work. I need more Vette time!
Corvette Store
Good size intercooler for sale for LTX C4
