F/S 1980 Corvette Project
#1
Racer
Thread Starter
Member Since: Jul 2001
Location: Jasper, GA
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
F/S 1980 Corvette Project
I am selling whole. Although not really the best candidate for a project, there are many items still in the car that are worth more than I am asking for the entire car. I am not interested in parting out. The car is located in Charles Town, WV and must be trailered to pick up. It still has the original 350 (L48) with less than 50,000 original miles on it... that's right, this car has less than 50,000 original miles. It led a neglected life ( I am not the original owner ) and then I had it under a tempoprary structure that collapsed under heavy snow several years ago. I was going to remove the engine, trans, rear to use in a separate project, but have decided to just sell and move on. Here are some specifics:
I have the title, it is not a salvage title!
The body is not a loss! The structure that fell on it came accross the T-tops and cracked them, the right front fender separated at the factory seam. The body is very much useful.
It's a 4 spd, numbers matching All pedals still in car as well.
The rear was rebuilt with 373 gears. It has approximately 5000 - 7000 miles on it since rebuild. I had this professionally done. numbers matching
original numbers matching 350 (L48)
Solid frame
I have some other parts I will include with it if wanted...
Trim pieces, gauges, some interior pieces, A/C parts, headers ... to name a few. I do not have a complete list, but I have other parts I will let go with it as well.
I am not interested in parting out, so please do not ask to part.
$1,600.00
If you would like pics, please ask and I will be more than willing to send. I will post pics here later if necessary.
[IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG]
I have the title, it is not a salvage title!
The body is not a loss! The structure that fell on it came accross the T-tops and cracked them, the right front fender separated at the factory seam. The body is very much useful.
It's a 4 spd, numbers matching All pedals still in car as well.
The rear was rebuilt with 373 gears. It has approximately 5000 - 7000 miles on it since rebuild. I had this professionally done. numbers matching
original numbers matching 350 (L48)
Solid frame
I have some other parts I will include with it if wanted...
Trim pieces, gauges, some interior pieces, A/C parts, headers ... to name a few. I do not have a complete list, but I have other parts I will let go with it as well.
I am not interested in parting out, so please do not ask to part.
$1,600.00
If you would like pics, please ask and I will be more than willing to send. I will post pics here later if necessary.
[IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG]
Last edited by Torcher; 11-25-2010 at 11:49 AM. Reason: add pics
#2
Advanced
Member Since: Sep 2010
Location: Prichard WV
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
I am selling whole. Although not really the best candidate for a project, there are many items still in the car that are worth more than I am asking for the entire car. I am not interested in parting out. The car is located in Charles Town, WV and must be trailered to pick up. It still has the original 350 (L48) with less than 50,000 original miles on it... that's right, this car has less than 50,000 original miles. It led a neglected life ( I am not the original owner ) and then I had it under a tempoprary structure that collapsed under heavy snow several years ago. I was going to remove the engine, trans, rear to use in a separate project, but have decided to just sell and move on. Here are some specifics:
I have the title, it is not a salvage title!
The body is not a loss! The structure that fell on it came accross the T-tops and cracked them, the right front fender separated at the factory seam. The body is very much useful.
It's a 4 spd, numbers matching All pedals still in car as well.
The rear was rebuilt with 373 gears. It has approximately 5000 - 7000 miles on it since rebuild. I had this professionally done. numbers matching
original numbers matching 350 (L48)
Solid frame
I have some other parts I will include with it if wanted...
Trim pieces, gauges, some interior pieces, A/C parts, headers ... to name a few. I do not have a complete list, but I have other parts I will let go with it as well.
I am not interested in parting out, so please do not ask to part.
$1,600.00
If you would like pics, please ask and I will be more than willing to send. I will post pics here later if necessary.
I have the title, it is not a salvage title!
The body is not a loss! The structure that fell on it came accross the T-tops and cracked them, the right front fender separated at the factory seam. The body is very much useful.
It's a 4 spd, numbers matching All pedals still in car as well.
The rear was rebuilt with 373 gears. It has approximately 5000 - 7000 miles on it since rebuild. I had this professionally done. numbers matching
original numbers matching 350 (L48)
Solid frame
I have some other parts I will include with it if wanted...
Trim pieces, gauges, some interior pieces, A/C parts, headers ... to name a few. I do not have a complete list, but I have other parts I will let go with it as well.
I am not interested in parting out, so please do not ask to part.
$1,600.00
If you would like pics, please ask and I will be more than willing to send. I will post pics here later if necessary.
Interseted in seeing photos- pm me for email address
#7
Racer
#11
Le Mans Master
Member Since: Jun 2007
Location: Where it's always hot as Hell-South Louisiana.
Posts: 7,666
Likes: 0
Received 1 Like
on
1 Post
St. Jude Donor '07-'08-'09-'10-'11-'12-'13
?
I am only interested in the 4 speed and associated parts- pedal assembly, Z bar,clutch,bell housing, tranny ,driveshaft and anything else that goes with the 4 speed. I would offer $400 for the entire project since it would take $1000 to deliver it to south La.
Just an offer. I know its a low ball, but thats all I can do with $1400 invested in it.
Just an offer. I know its a low ball, but thats all I can do with $1400 invested in it.
#12
Racer
Thread Starter
Member Since: Jul 2001
Location: Jasper, GA
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
I am only interested in the 4 speed and associated parts- pedal assembly, Z bar,clutch,bell housing, tranny ,driveshaft and anything else that goes with the 4 speed. I would offer $400 for the entire project since it would take $1000 to deliver it to south La.
Just an offer. I know its a low ball, but thats all I can do with $1400 invested in it.
Just an offer. I know its a low ball, but thats all I can do with $1400 invested in it.
#13
Le Mans Master
Member Since: Jun 2007
Location: Where it's always hot as Hell-South Louisiana.
Posts: 7,666
Likes: 0
Received 1 Like
on
1 Post
St. Jude Donor '07-'08-'09-'10-'11-'12-'13
My offer was NOT for parting it out. It was a $400 offer for the entire pile of stuff you got. It already looks to be "parted out" to me, but thats just me.
#14
Racer
Thread Starter
Member Since: Jul 2001
Location: Jasper, GA
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
you are correct, I have parted it out as much as I want to. I will respectfully decline your $400.00 offer! Thanks
#15
Le Mans Master
Member Since: Jun 2007
Location: Where it's always hot as Hell-South Louisiana.
Posts: 7,666
Likes: 0
Received 1 Like
on
1 Post
St. Jude Donor '07-'08-'09-'10-'11-'12-'13
happy holidays and Merry Christmas.