FS : For Sale 69 Convertible Project

[toddz1217]

Here's what's been done. Looking to get $22,500 for the car and parts. 69 Corvette Convertible Matching Numbers, 4 Speed, 350 SB. Located in Allen TX VIN: 194679S713989 Here’s your chance to put back together a classic car and drive it by summer. What’s been Replaced and or Repaired: The car was completely stripped down to bear frame and then has slowly been put back together to this point. The car is painted Black and is waiting for someone to drop the rebuilt original motor and transmission in the car. • Frame has been restored • Trailing Arms have been replaced • Rear Spring was Replaced • Rear End was rebuilt • Both Upper and Lower Control arms were rebuilt • All Bushings were replaced • All 4 Rotors were Replaced • All 4 Brake Calipers and Lines were replaced • All Dust shields on rotors were replaced • Shocks were all replaced with new • Fuel tank was restored • Fuel lines were replaced • Windshield frame was replaced with out removal of VIN section • Fire Wall has been repaired • Top and side of passenger side have been replace in front • Have new front windshield • Power Steering box has been replaced and reinstalled • Engine has been completely overhauled and rebuilt with out removal of numbers (not installed) • Transmission has been rebuilt • Have new master cylinder for brakes • Have new interior carpet • Have new seat covers and foam, I have removed one seat cover and foam • Have new door panels • Have shims for Trailing arms for alignment • Have repainted engine compartment • Have new Center cluster console • Passenger Door has been replaced • Have new rear body mounts • Have new Deck lid supports • Have new Body mount bolt and shims installed Notes on other Items: • I have all original parts • Car has been painted Black • Seat frames have been blasted and painted • All seams have been replaced with actual fiberglass • The convertible top will need to be restored and the top will need to be replaced • Most parts are labeled for location • All Half shafts have been rebuilt and reinstalled • Drive shaft has been rebuilt but not reinstalled • You will need a new front support and a radiator frame Here are some pictures please let me know if you have questions. I don't have any pictures of the engine has it is bagged up.

[weider1717]

Off the subject..but what size tires are those they have a nice meaty look to them.

[toddz1217]

265 50 R15 front
275 50 R15 rear

They were on my 74 orginally.

[toddz1217]

Bump

[fisheson]

Originally Posted by weider1717

Off the subject..but what size tires are those they have a nice meaty look to them.

i agree on the tires, what are the rims for depth-backspacing?, got a closer look of the back and front tires?? is that a long hood76 and up to eliminate the wiper door? with a little chrome!..ssswhcwing!!...NICE!.........th anks

[SteveG75]

Beautiful. I am tempted to offer you a trade for my '75 vert mild custom but your car is too nice for what I want for my next project. I was thinking 69 vert with C4 suspension, EFI BB and 6 speed stick.

Of course, if you would like a '75.
http://forums.corvetteforum.com/c3-g...th-thread.html

[toddz1217]

No backspacing on the wheels. It's the orginal hood just tough to see with everything black and no chrome on it.

[Jclgodale3]

Very nice project! But on a more serious note...ROLL TIDE!

[toddz1217]

Go HORNS

[toddz1217]

bump

[ED69ray]

base or L-46 350/350 car?

[toddz1217]

Not sure I plan on dropping the engine in next week so I will go look at the number on the engine. I currently have it wrapped in plastic, so I need to unwrap it and I will let you know.

Thanks

[Vettebuyer5869]

Originally Posted by toddz1217

Not sure I plan on dropping the engine in next week so I will go look at the number on the engine. I currently have it wrapped in plastic, so I need to unwrap it and I will let you know.

Thanks

You know its numbers matching but you dont know if its a 300 or 350 hp?

Whats the paint code on the trim tag?

Interior color and trim code?

[emccomas]

Very nice project! But on a more serious note...ROLL TIDE!

Go HORNS

I guess this issue has been addressed.

[Jclgodale3]

Originally Posted by emccomas

I guess this issue has been addressed.

Now back to the other questions above

[toddz1217]

Regarding the engine there were two 350 300 produced codes were HY and HZ, those two letters are on the engine block and are not part of the VIN. So I know it's numbers matching because when I looked at the engine number and compared it to the vin number those number's matched but I did not write down the code either Hy or HZ.

Trim Tag ZQ4 900 Paint Chevrolet F23

Hope that makes sense.

[ED69ray]

thx, looks like a base 300hp car

should be HY as that was the code for a 4 speed - HZ denotes TH400

now what about p/s or p/b - factory a/c or non a/c car

and what color black was it painted?

[toddz1217]

But what about HW HX?

Pwr Steering Yes, AC No

Original was Tuxedo Black, so Just a nice Black

[ED69ray]

Originally Posted by toddz1217

But what about HW HX?

Pwr Steering Yes, AC No

Original was Tuxedo Black, so Just a nice Black

HW and HX would both be L-46 350/350 - but you said either HY or HZ was on the block. Both of those denote a base 350ci/300hp car


Either way it looks like a nice project car - although its priced a little steep.

Did you have it painted locally? If so who did it?

Good Luck, Ed

[toddz1217]

Steep, probably but I have put so much time and money into it myself it's not one of those things you want to give away. And truth be told I would probably keep it, but sometimes it gets hard for me.

I don't have alot of the technical knowledge to work on the car and the person I rely on to help me is not reliable. If I had some one that could help then I would probably get it done sooner.

Yes I had a guy that is in the colony paint it for me, does good work. email me and I will get you his contact information.

toddz1217@sbcglobal.net