Corvette Chambered Exhaust Kit Stainless Steel Big Block Kit Needed
#1
Corvette Chambered Exhaust Kit Stainless Steel Big Block Kit Needed
Guys,
My 69 390 horse is in need of an exhaust system looking into getting a Chambered system. Where is a good place to order from. I googled didn't find much. Thanks
My 69 390 horse is in need of an exhaust system looking into getting a Chambered system. Where is a good place to order from. I googled didn't find much. Thanks
#4
Instructor
look at Allen's corvette exhaust,it is chambered 60's style,they make several different systems.Wilcox corvette carry's it.they have a couple short video on them.
#6
Burning Brakes
Got mine from allens about 8 years ago. I love the sound. Allens has more chambered length in theirs compared to other manufactures so its not too loud and the chambers are 3" so you get a true 2 1/2" system.
Not sure how they configure them today but when I spoke with them I had them make my 69 after the 65 exhaust which is a true 2 1/2" system all the way out... they even made me 2 1/2" stainless tips at the mufflers because the factory stuff narrowed down to 2" in two places (right at the manifold flange and the tip going out of the exhaust were both necked down to 2" on factory styled exhaust.)
Also you can get it in aluminized or two diff grades of stainless.
necked down areas circled in red.
Not sure how they configure them today but when I spoke with them I had them make my 69 after the 65 exhaust which is a true 2 1/2" system all the way out... they even made me 2 1/2" stainless tips at the mufflers because the factory stuff narrowed down to 2" in two places (right at the manifold flange and the tip going out of the exhaust were both necked down to 2" on factory styled exhaust.)
Also you can get it in aluminized or two diff grades of stainless.
necked down areas circled in red.
Last edited by mysixtynine; 07-11-2020 at 09:42 AM.
#8
Dr. Detroit
Member Since: Mar 2012
Location: New Braunfels Texas
Posts: 9,963
Received 3,893 Likes
on
2,564 Posts
I put the the four chamber kit on my 69' 427/400 and it not only sounded very nice but going from the pathetic stock 2" to 2.5" made it run much better.....I bought it from Wilcox. Fit perfect too.
Jebby
Jebby
The following users liked this post:
JBrooke825 (07-13-2020)