68 door removal
#2
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,468 Likes
on
1,247 Posts
Cruise-In II Veteran
My advice would be to paint the car with the doors in place.
There are two ways to remove the doors; with the hinges or without. Leaving the hinges on the car, the hinges unbolt inside each door. Removing the hinges with the door, the hinges unbolt from inside the car.
In either instance, index all the bolt heads and mark the shim stacks to assist with alignment when the doors go back on.
The AIM helps.
There are two ways to remove the doors; with the hinges or without. Leaving the hinges on the car, the hinges unbolt inside each door. Removing the hinges with the door, the hinges unbolt from inside the car.
In either instance, index all the bolt heads and mark the shim stacks to assist with alignment when the doors go back on.
The AIM helps.
Last edited by Easy Mike; 04-13-2013 at 10:22 AM.
#3
In process of painting my 68 now-took doors off also-removed access plates to hinges on doors and sprayed white paint on hinges to line up hinges when reassembling- no problem-reinstall will take 2 people though
#6
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,468 Likes
on
1,247 Posts
Cruise-In II Veteran
#7
Former Vendor
Member Since: Aug 2006
Location: Jeffersonville Indiana 812-288-7103
Posts: 76,656
Received 1,813 Likes
on
1,458 Posts
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15