63Banshee

How are the aftermarket exhaust bezels for 68s? I'm looking at a NOS pair, but may not go that route if the repop quality is good... not fair, good.

dj

0Road-Race Vette

I bought a set of repo bezels for my 68,they were good .then i found a set of NOS(online).Bought them. They were not great at all. Basically, a lot of times NOS chrome is poor quality since GM wasnt really concerned about car shows. Also,a lot of NOS parts you find today are factory "rejects " that were not good enough to put on a car. Hope that helps. If you do find some GM ones make sure you can look at them close or have very detailed photos,as again they may not be what you expect.

R1234

I'm pleased with the repos on my 68.
Bryan

63Banshee

Thanks guys! Sounds like repops are the way to go.

682XLR8

Got my bezels from Corvette Central, they look fine and installed with no problem

wallifishrmn

The rechromer told me most of the chrome parts made by GM were not great--not making show cars--and they have defects that make them difficult/very expensive/impossible to rechrome--didn't want to waste my money. The tips--I bought another set of SS and are having them rechromed. The next problem was he wouldn't rechrome anything made in China--because of the poor quality metal. Start asking your suppliers and ebay sellers if their parts are made in US--you are going to have trouble finding quality US made parts. Finally bought a set from Paragon and are having them rechromed.

jshug

Try here.....

http://www.stainlessworks.net/cart/p...roducts_id=436


Not sure about bezels.......but nice tips.

63Banshee

Good stuff. Thanks guys!