Go Back   Corvette Forum > C3 Corvettes, 1968 - 1982 > C3 Tech/Performance
Sign in using an external account
Register Forgot Password?
Register Search Today's Posts Mark Forums Read FAQ Vendor Directory
Search
C3 Tech/Performance
V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette Sponsored by
VBP

Welcome to Corvetteforum.com!
Welcome to Corvetteforum.com.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Corvetteforum.com today!


Corvette Store
 
 
C7 Parts & Accessories
C6 Parts & Accessories
C5 Parts & Accessories
C4 Parts & Accessories
C3 Parts & Accessories
C2 Parts & Accessories
C1 Parts & Accessories
Wheels & Tires
Sponsored Ads
 
 
Vendor Directory
  
Reply
 
 
 
 
Thread Tools Search this Thread
Old 11-27-2001, 02:06 PM   #1
nunus79
CF Senior Member
 
Member Since: Nov 2000
Location: Honolulu Hawaii
Default Duntov 30/30

CompCams is selling a hydraulic version of this cam. What made it so legendary? What engines were they originally installed in? What were its original characteristics?
nunus79 is offline   Reply With Quote
Old 11-27-2001, 02:26 PM   #2
Rowdy Rat
CF Senior Member
 
Rowdy Rat's Avatar
 
Member Since: Dec 1999
Location: PA
Stans.Corvette.Restoration
Default Re: Duntov 30/30

The Duntov (097) and 30-30 are actually two different camshafts.

There are a couple of really good threads over in one of the more recent NCRS Discussion Board archives that I'm not even going to try and compete with. If you're interested in these cams, take a look at what Duke Williams and John Hinckley posted at the NCRS site... Some really great info!

Regards,
Rowdy Rat is offline   Reply With Quote
Old 11-27-2001, 04:30 PM   #3
gkull
CF Senior Member
 
gkull's Avatar
 
Member Since: Apr 1999
Location: Reno Nevada
Default Re: Duntov 30/30 (nunus79)

Back in the old old day's. Loud solid cams were the cruisers and wanna be racers dream. They were used in some of the first mass produced motors achiving 1 hp or better per cubic inch. Before aftermaket cam producers really got going to the general public. As a chevy owner you went down to the dealer for your hot parts.

IMO all those cams are just junk. Anybody that goes down and buys any stock cam or even a 350/350 hp cam for their hopup rebuild is not in touch with reality. They were produced before modern springs. So Chevy went with max duration on slow ramps and very little lift. If someone today told me that they had a 3/4 race cam I start looking for a "S" tatooed on their forhead for stupid!
gkull is offline   Reply With Quote
Old 11-27-2001, 05:19 PM   #4
thejaf
CF Senior Member
 
thejaf's Avatar
 
Member Since: Oct 2000
Location: Roanoke Virginia
Default Re: Duntov 30/30 (gkull)

Quote:
Back in the old old day's. Loud solid cams were the cruisers and wanna be racers dream. They were used in some of the first mass produced motors achiving 1 hp or better per cubic inch. Before aftermaket cam producers really got going to the general public. As a chevy owner you went down to the dealer for your hot parts.

IMO all those cams are just junk. Anybody that goes down and buys any stock cam or even a 350/350 hp cam for their hopup rebuild is not in touch with reality. They were produced before modern springs. So Chevy went with max duration on slow ramps and very little lift. If someone today told me that they had a 3/4 race cam I start looking for a "S" tatooed on their forhead for stupid!
Gkull,

That sounds a lot like the mystery cam I have in my 406 (long duration dual pattern with relatively low lift). Do know anywhere on the web that has GM part #'s for these cams as well as the cam specs for "historical" solid lifter camshafts?
thejaf is offline   Reply With Quote
Old 11-27-2001, 05:32 PM   #5
Larry B.
CF Senior Member
 
Larry B.'s Avatar
 
Member Since: Sep 2000
Location: Orlando Floriduh
Default Re: Duntov 30/30 (nunus79)

OK. guys here's the scoop on the cam.. It came stock in 65-67 cars that were either 327/360hp or 375hp/f.i. They got the 30-30 nickname for the valve lash settings.... .030" on both intake and exhaust valves. Not a great cam for low end torque.. The "097" is a 283/270hp or 283hp. cam
Larry B. is offline   Reply With Quote
Old 11-27-2001, 05:44 PM   #6
DaveL82
CF Senior Member
 
DaveL82's Avatar
 
Member Since: Jul 1999
Location: Plano TX
Default Re: Duntov 30/30 (silvervetteman)

The cam was design for racing in the mid 60's. It has a lot of duration/overlap with low lift. If was desinged to work with the valve springs and heads available at the time.

This is old technology and should never be used in car today unless you are building one to make an engine stock/original. Too much has been learned since then. The cam should sound good though.
DaveL82 is offline   Reply With Quote
Old 11-27-2001, 09:51 PM   #7
nunus79
CF Senior Member
 
Member Since: Nov 2000
Location: Honolulu Hawaii
Default Re: Duntov 30/30

Rowdy Rat
I tried to find that post but was unsuccessful. I plan on trying it again w/different search. Thanks

George
"S" LOL Don't get ideas. I'm not planning on changing my 327/350 cam just yet :lol: :lol: :lol: :lol: :lol:

Silvervetteman
You answered most of my questions. Thanks

DaveL82
CompCams seems to have updated that cam w/some decent lift.
nunus79 is offline   Reply With Quote
Old 11-27-2001, 10:27 PM   #8
Vetterodder
CF Senior Member
 
Vetterodder's Avatar
 
Member Since: Feb 1999
Location: Fountain Hills AZ
Default Re: Duntov 30/30 (nunus79)

The "30-30" was used in `64 -`65 365hp & 375hp 327's and in `67 - `69 Z28 302's. As already posted, it gave up some performance in order to have adequate idle vacuum for power brakes and FI and also to be gentler on the valve train. Cam and valve train technology has come a long way in the past 35 years and I don't know of any good reason to use anythng other than a new design if replacing a cam.
Vetterodder is offline   Reply With Quote
Old 11-27-2001, 10:38 PM   #9
INTIMIDATOR ZO6
CF Senior Member
 
INTIMIDATOR ZO6's Avatar
 
Member Since: Mar 2001
Location: Summerville SC
Default Re: Duntov 30/30 (nunus79)

I believe the 30/30 cam came stock in the Z/28 302 it's a very nice cam that I can remember :D Sounded good too! I used to own one I also remember the adjustments on the valve lash being .030 intake/.030 exhaust :cool:
INTIMIDATOR ZO6 is offline   Reply With Quote
Old 11-28-2001, 10:09 AM   #10
Rowdy Rat
CF Senior Member
 
Rowdy Rat's Avatar
 
Member Since: Dec 1999
Location: PA
Stans.Corvette.Restoration
Default Re: Duntov 30/30

Dave,

Try this one...
http://www.ncrs.org/forum/archive7.cgi?read=20228

and
http://www.ncrs.org/forum/archive6.cgi?read=9776

...are just a couple that I found interesting. There are a few others that I uncovered during my search.

Regardless of what camshaft you chose, I'd consider what Duke and John have to say on this topic... These guys have a lot of experience.

Regards,
Rowdy Rat is offline   Reply With Quote
Old 11-28-2001, 11:42 AM   #11
Paul 75 L82
CF Senior Member
 
Paul 75 L82's Avatar
 
Member Since: Dec 2000
Location: Royal Palm Beach Florida
Send a message via AIM to Paul 75 L82
Default Re: Duntov 30/30 (Rowdy Rat)

Installed my first 30/30 cam in 1968, WOW we thought it was great, but today go with the Extreme Engery cams from Comp. Ramp speed and lifts have all been engr'd for more performance and you will be happier.
Paul 75 L82 is online now   Reply With Quote
Old 11-28-2001, 11:47 AM   #12
Ganey
CF Senior Member
 
Ganey's Avatar
 
Member Since: Apr 1999
Location: CORVETTE 77 385 C.I. TEXAS
Default Re: Duntov 30/30 (nunus79)

Ran the 30-30 in my first Hot Rods. Ran it first w/ 283 then w/ 306 (302 built & bored), manual trans. & 4.56 posi. gears. Would take a GTO in less than a heartbeat (Chevy). LOL, the older guys started calling me OneFastKid.

:cool:
Ganey is offline   Reply With Quote
Old 11-28-2001, 12:03 PM   #13
Wrencher
CF Senior Member
 
Wrencher's Avatar
 
Member Since: Oct 1999
Default Re: Duntov 30/30 (Ganey)

I'll offer another opinion here. I agree with gkull on the quality and performance of modern cams and springs, especially some of the rollers out there, but for a mild, cheap street motor that will last forever and still sound good and perform well, 30/30's are OK by me. I've built a number of high-end HP engines, but I always make sure that the customer understands the life expectancy (short) and overhaul intervals (frequent) of these engines. If your looking for hydraulics, by all means go with a modern stick.

Hans
Wrencher is offline   Reply With Quote
Old 11-28-2001, 12:03 PM
 
Go Back   Corvette Forum > C3 Corvettes, 1968 - 1982 > C3 Tech/Performance
Reload this Page Duntov 30/30
 
 
 
Reply

Tags
097, 30, 3030, brakes, cam, dontov, duntov, hydraulic, lash, power, racing, settings, specs, valve, version


Thread Tools Search this Thread
Search this Thread:

Click for Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -4. The time now is 08:44 PM.


Emails & Password Backup

Search Engine Friendly URLs by vBSEO 3.5.2