C3/C4-Stealth Ram-Hood
#1
Heel & Toe
Thread Starter
Member Since: Oct 2005
Location: Howell MI
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
C3/C4-Stealth Ram-Hood
I've been researching past threads on the Holly Stealth Ram. I've saw
C4 links that have a modified plenum several different ways that fits - also with pics. Is there more/less room under a C3 hood than a C4? Anyone have pics of the stealth ram in a C3 - I have a 78 with a L48 hood.
C4 links that have a modified plenum several different ways that fits - also with pics. Is there more/less room under a C3 hood than a C4? Anyone have pics of the stealth ram in a C3 - I have a 78 with a L48 hood.
#4
Safety Car
I went with a TPIS miniram because no one new for sure that the SR would fit under a stock hood. I read a few months later that it would fit under the later C3 hoods, but I don't remember what years that included. Supposedly it will fit under a '81 hood and if I had known this I would have gotten one. Hopefully someone will chime in that has experience with it.
#5
Heel & Toe
Thread Starter
Member Since: Oct 2005
Location: Howell MI
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
StickBoy - I find it real hard to believe that someone at Holley doesn't realize how many C3's and C4's could use this product with just a teeny bit of tweeking on their part. I ask Holley for a detailed drawing and they said that was against corporate policy.
I did find a link where someone has installed the HSR under the hood of a 79 but didn't say if it was a L48 or what.
I have a regular HEI distributor - guess that has to be replaced - don't have a clue what would be a good cheap altenative.
I've also been reading on the MegaSquirt.
Lot's of homework to do before this project starts.
How do you like your system - what about your performance and gas mileage. Kills me to run with the C4 and C5 guys that are getting 28 MPG.
I did find a link where someone has installed the HSR under the hood of a 79 but didn't say if it was a L48 or what.
I have a regular HEI distributor - guess that has to be replaced - don't have a clue what would be a good cheap altenative.
I've also been reading on the MegaSquirt.
Lot's of homework to do before this project starts.
How do you like your system - what about your performance and gas mileage. Kills me to run with the C4 and C5 guys that are getting 28 MPG.
#6
Melting Slicks
Member Since: Mar 2006
Location: Orange Park Fl
Posts: 2,433
Likes: 0
Received 0 Likes
on
0 Posts
I don't find it hard to believe at all. Holley's customer service (and product quality) disapeared years ago. God bless, Sensei
#7
Safety Car
My milage around town has gone up, highway milage dropped some. The original CCC system was very efficient on the highway. I was getting 21MPG without overdrive. I think I am getting around 12/18 right now, but I haven't really driven it much since I updated the firmware.
#9
Heel & Toe
Thread Starter
Member Since: Oct 2005
Location: Howell MI
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
VetteAddic - Wow thats only 9.25 inches - I've been reading 10.25 on other posts. I have around 9.75 inches safely. Is that an unmodified intake and plenum? I'm running the GM Fastburn Alumninum Vortec style heads with 62cc chamber.
Could you give me some measurements on the intake manifold ports that go against the head?? I've heard theres quite a difference in the L31 Vortec head and Fastburn on port size ?" X ?" . The fastburn is 210cc and I think the L31 is 170 cc but I don't know either dimension in inches.
Could you give me some measurements on the intake manifold ports that go against the head?? I've heard theres quite a difference in the L31 Vortec head and Fastburn on port size ?" X ?" . The fastburn is 210cc and I think the L31 is 170 cc but I don't know either dimension in inches.