Updated list of good stuff, lots sold, lots left.
#1
Safety Car
Thread Starter
Updated list of good stuff, lots sold, lots left.
Carb Q-jet: I belive this is a Q-jet of a 1970 350-350 Vette. 07029207 and 2518 on drivrs side of the body. If interested email and we will work more details and casting #'s
L-36 intake 394780 $ 150.00
Distributor napa D89193 Works fine looks pretty good 50.00
New in box (nib) MSD distributor 8461 and NIB cap 8437. 125.00 for both. Distributor is mech advance.
NIB MSD Boost Timing master # 8762 100.00
NIB Wieand triangle air cleaner (the one you see on blowers all the time) 25.00
Summit chrome valve covers, they are NIB, but we scratched them a tiny putting them on to test fit. 50.00
NIB Bowtie push in breathers 10.00 for both
1-Richmond 6 spd, 2.77 first, .62 6th. If interested email and I will give more details. I have the one lef that has good gears but will need pulled apart and inspected, probably need synchros
8 used 4500 miles 2.19 intakes out of Edelbrock RPM heads 50.00
Moroso push in breathers (new) 15.00 for both
NIB Isky poly locks #PL-7/16 30.00
NIB Isky 347-st retainers, 20.00
NIB Isky solid flat tappet cam 264 at .050 .630 lift on a 110 LSA 75.00
New chrome BBC 6 qt oil pan 50.00
rear end cover 50.00 good shape of a stock big block car
NIB Comp 305H-10 cam .253 at .050 .575 lift on a 110. This is the biggest flat hydraulic cam Comp makes. 75.00
Stock BB radiator out of a 69, good shape 100.00
Holley Blue pump, 4500 miles, 50.00
Fel Pro 1017-1 head gaskets, new 40.00
stock BB half shafts 50.00 for both
stock trailing arm assembly, brakes, etc. complete. 250.00 for both sides complete.
360# fiberglass spring, 6000 miles, 150.00. I have wrapped the exhaust system that is near the spring and it has had no heat exspossed to it. It is in great shape.
NIB Arias forged (4.280 bore 454 +.030) flat top pistons (blower pistons) they are made for a 1000 HP blower motor, but will work great for a normally aspirated motor if your heads have small enough combustion chambers. 350.00
I can not post, but can email pics of any of the above items.
L-36 intake 394780 $ 150.00
Distributor napa D89193 Works fine looks pretty good 50.00
New in box (nib) MSD distributor 8461 and NIB cap 8437. 125.00 for both. Distributor is mech advance.
NIB MSD Boost Timing master # 8762 100.00
NIB Wieand triangle air cleaner (the one you see on blowers all the time) 25.00
Summit chrome valve covers, they are NIB, but we scratched them a tiny putting them on to test fit. 50.00
NIB Bowtie push in breathers 10.00 for both
1-Richmond 6 spd, 2.77 first, .62 6th. If interested email and I will give more details. I have the one lef that has good gears but will need pulled apart and inspected, probably need synchros
8 used 4500 miles 2.19 intakes out of Edelbrock RPM heads 50.00
Moroso push in breathers (new) 15.00 for both
NIB Isky poly locks #PL-7/16 30.00
NIB Isky 347-st retainers, 20.00
NIB Isky solid flat tappet cam 264 at .050 .630 lift on a 110 LSA 75.00
New chrome BBC 6 qt oil pan 50.00
rear end cover 50.00 good shape of a stock big block car
NIB Comp 305H-10 cam .253 at .050 .575 lift on a 110. This is the biggest flat hydraulic cam Comp makes. 75.00
Stock BB radiator out of a 69, good shape 100.00
Holley Blue pump, 4500 miles, 50.00
Fel Pro 1017-1 head gaskets, new 40.00
stock BB half shafts 50.00 for both
stock trailing arm assembly, brakes, etc. complete. 250.00 for both sides complete.
360# fiberglass spring, 6000 miles, 150.00. I have wrapped the exhaust system that is near the spring and it has had no heat exspossed to it. It is in great shape.
NIB Arias forged (4.280 bore 454 +.030) flat top pistons (blower pistons) they are made for a 1000 HP blower motor, but will work great for a normally aspirated motor if your heads have small enough combustion chambers. 350.00
I can not post, but can email pics of any of the above items.
#2
Melting Slicks
Member Since: Nov 2001
Location: Katy (Houston) TX
Posts: 2,659
Likes: 0
Received 7 Likes
on
5 Posts
CI 7-8 Veteran
Re: Updated list of good stuff, lots sold, lots left. (69 N.O.X. RATT)
Please send pics of the radiator. I assume it's copper/brass?? I also need measurements.
Thanks.
travisshort(at)hotmail.com
Thanks.
travisshort(at)hotmail.com
#3
Le Mans Master
Member Since: Jun 2003
Location: … in Tucson AZ
Posts: 9,274
Received 112 Likes
on
72 Posts
St. Jude Donor '09
Re: Updated list of good stuff, lots sold, lots left. (69 N.O.X. RATT)
Hi there, this is an off the wall question, but could you measure the distance between the carbs (1-2, 2-3, 1-3, front-front, front-back, etc.) for the triangle air cleaner??
I have a small block tri-power with 3 2-bbl Rochesters on my car right now (Veeeerrrrryyyyy cool!) :cool: and would like to see if this air cleaner will fit!
Thanks,
Paul
I have a small block tri-power with 3 2-bbl Rochesters on my car right now (Veeeerrrrryyyyy cool!) :cool: and would like to see if this air cleaner will fit!
Thanks,
Paul
#4
Drifting
Re: Updated list of good stuff, lots sold, lots left. (69 N.O.X. RATT)
Can you please tell me the part numbers for the two cam shafts? Do these cams come with lifters?
Thanks
Ken
Thanks
Ken
#5
Safety Car
Thread Starter
Re: Updated list of good stuff, lots sold, lots left. (73sbvert)
I do not have a dual quad set up so I can not measure the distance for you. This air cleaner does fit on two carbs that is on top of a blower.
The cams are the Comp 305 H and a custom 110 LSA Isky Z-89.
Isky 396289
Comp 11-214-4
Travis I tried to send the pics to you, please send me an email for some reason my computer works better thatt way :confused:
The cams are the Comp 305 H and a custom 110 LSA Isky Z-89.
Isky 396289
Comp 11-214-4
Travis I tried to send the pics to you, please send me an email for some reason my computer works better thatt way :confused: