WTB: Pre-1980 transmission crossmember
#3
Advanced
If you don't need original, the Bowtie Overdrives C3 crossmember allows you to run any type of dual exhaust because it tucks right up underneath the floor pans. I used one and it was a great piece! Good luck!
#4
Race Director
I'll be removing the automatic transmission crossmember from my '73 BB and won't be reinstalling it.
It will be a couple of months before I get to it.
Let me know.
It will be a couple of months before I get to it.
Let me know.
#5
Intermediate
Thread Starter
#6
Intermediate
Thread Starter
#7
Race Director
I believe they are the same.
The only difference is the manual trans crossmember was welded in and the automatics were bolted in.
If you plan to use exhaust tubing over 2.5 inch diameter, you might want to look at an aftermarket crossmember like G-Force.
The only difference is the manual trans crossmember was welded in and the automatics were bolted in.
If you plan to use exhaust tubing over 2.5 inch diameter, you might want to look at an aftermarket crossmember like G-Force.