Early 1968 435 hp 3x2 intake and carbs for sale
#1
Early 1968 435 hp 3x2 intake and carbs for sale
Rectangular port 3x2 intake and carbs for sale.
Intake has 4217 and 10.24.67 on bottom.
Outside Carb numbers are 3902353-EU list 3659 832 and 913 respectively.
Center carb numbers are 3902355-EV list 3660 681
All carbs have J 6 on the side.
The intake is clean, has not been cut on mating surface and has only one heli-coil at the distributor hold down.
Also the intake has had the heat riser flange milled off.
The carbs are clean and have linkage but lack floats, diaphragms, choke, choke plate, float adjustment screws, fuel line, etc.
$2,200.
Intake has 4217 and 10.24.67 on bottom.
Outside Carb numbers are 3902353-EU list 3659 832 and 913 respectively.
Center carb numbers are 3902355-EV list 3660 681
All carbs have J 6 on the side.
The intake is clean, has not been cut on mating surface and has only one heli-coil at the distributor hold down.
Also the intake has had the heat riser flange milled off.
The carbs are clean and have linkage but lack floats, diaphragms, choke, choke plate, float adjustment screws, fuel line, etc.
$2,200.
Last edited by fastdavedk; 03-30-2014 at 11:35 AM.
#2
Rectangular port 3x2 intake and carbs for sale.
Intake has 4217 and 10.24.67 on bottom.
Outside Carb numbers are 3902353-EU list 3659 832 and 913 respectively.
Center carb numbers are 3902355-EV list 3660 681
All carbs have J 6 on the side.
The intake is clean, has not been cut on mating surface and has only one heli-coil at the distributor hold down.
Also the intake has had the heat riser flange milled off.
The carbs are clean and have linkage but lack floats, diaphragms, choke, choke plate, float adjustment screws, fuel line, etc.
$2,500.
Intake has 4217 and 10.24.67 on bottom.
Outside Carb numbers are 3902353-EU list 3659 832 and 913 respectively.
Center carb numbers are 3902355-EV list 3660 681
All carbs have J 6 on the side.
The intake is clean, has not been cut on mating surface and has only one heli-coil at the distributor hold down.
Also the intake has had the heat riser flange milled off.
The carbs are clean and have linkage but lack floats, diaphragms, choke, choke plate, float adjustment screws, fuel line, etc.
$2,500.
#4
Photos of the entire set up are now posted and the price has been reduced to $2,200.
#8
#9
For some reason I was not able to access your pm.
Personal email is davidmestemaker@hotmail.com
Personal email is davidmestemaker@hotmail.com
I will sell the intake for $1,200.