FS: AFR 210 Cylinder Heads for SBC
05-19-2012, 01:23 AM
#1
Melting Slicks
Thread Starter
FS: AFR 210 Cylinder Heads for SBC
For Sale: AFR 210cc Cylinder Heads for SBC
Selling one set of Air Flow Research 210cc Cylinder Heads (PN 1050 / pre-Eliminator style) for a Gen 1 Small Block Chevy.
Includes SS valves (three with tip pitting), Titanium retainers, locks, and springs.
Was setup for solid flat tappet camshaft and 400 steam holes equipped (can be used on non-400 SBC as well).
Heads were inspected by machine shop with only note is a slight indentation on deck surface from head gasket metal ring-correct Fel Pro gasket employed. Will clean up with minor surface or use as is.
No machine work done to these castings nor any thread issues.
2.08 / 1.60 valve sizing, 76 cc chambers
Mic’ed @ 76.4 cc chambers / 207 cc intake / 73 cc exhaust size
Flow charts supplied (281 cfm intake / 224 cfm exhaust at .600 lift)
Used: ~13,000 miles
Why: Upgraded to AFR 220’s!
Purchased new from AFR for $1684.
Price: $875 shipped anywhere within continental US in their original box/crate.
Paypal preferred.
Please post or email: tmcarthurs@hotmail.com
Selling one set of Air Flow Research 210cc Cylinder Heads (PN 1050 / pre-Eliminator style) for a Gen 1 Small Block Chevy.
Includes SS valves (three with tip pitting), Titanium retainers, locks, and springs.
Was setup for solid flat tappet camshaft and 400 steam holes equipped (can be used on non-400 SBC as well).
Heads were inspected by machine shop with only note is a slight indentation on deck surface from head gasket metal ring-correct Fel Pro gasket employed. Will clean up with minor surface or use as is.
No machine work done to these castings nor any thread issues.
2.08 / 1.60 valve sizing, 76 cc chambers
Mic’ed @ 76.4 cc chambers / 207 cc intake / 73 cc exhaust size
Flow charts supplied (281 cfm intake / 224 cfm exhaust at .600 lift)
Used: ~13,000 miles
Why: Upgraded to AFR 220’s!
Purchased new from AFR for $1684.
Price: $875 shipped anywhere within continental US in their original box/crate.
Paypal preferred.
Please post or email: tmcarthurs@hotmail.com
Last edited by No Go; 05-22-2012 at 10:14 PM. Reason: Price Reduction
05-23-2012, 11:26 PM
#3
Instructor
Member Since: Mar 2011
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
)
