FS: 1977 for parts or easy project - $750-$1500
#1
Melting Slicks
Thread Starter
FS: 1977 for parts or easy project - $750-$1500
$1500 with all parts and wheels,
$1250 with all parts, no wheels,
$750 frame, body, engine (good # match short block) and trans (good TH350) only.
Come and get it! I have too many projects going on so it is time for some early spring cleaning. The good frame alone would be worth this price.
Details:
My college car, bought in Missouri in '02, parked in '06 for a resto that never happened. Sat in garage for 16yrs before I bought it. Garaged or covered most of its life with me, 100% garaged since parked. CLEAR title in hand. Never wrecked.
100k mi on frame, engine, and most suspension.
(Original) engine needs a bottom end rebuild but has never been bored before. TH350 has ~10k on a rebuild. 3.08 diff.
Good frame with no rust of significance, body mount bolts may be a little rusty, I've never dealt with them.
Usable body. Cracks here and there but all repairable. No sign yet seen of birdcage rust. Good headlight assemblies. Good hood (no cracks, just needs repaint.)
Not much interior. Good seat frames and HVAC parts are all present.
Lots of good chassis parts as seen below. Engine fan and springs sold. Radiator trashed. Headers sold. Power steering parts good except control valve. Poly bushings on most parts with ~10k mi.
This is dirt cheap folks. The $1500 happens to be just what I need for a new block for my '70 LT-1 but more than anything I need the garage space and one less project clogging my mental space. Worth a lot more as parts (as I'd intended to sell it) but I don't have the time.
You must pick up!. Unless you can find a shipper who wants to deal with a car with no wheels (unlikely) you will need to come get it yourself. I will do all I can to help you load it.
PM for contact info, I am in San Jose near Santana Row and Santa Clara.
Tuning for Beer w/ Lars in 05
$1250 with all parts, no wheels,
$750 frame, body, engine (good # match short block) and trans (good TH350) only.
Come and get it! I have too many projects going on so it is time for some early spring cleaning. The good frame alone would be worth this price.
Details:
My college car, bought in Missouri in '02, parked in '06 for a resto that never happened. Sat in garage for 16yrs before I bought it. Garaged or covered most of its life with me, 100% garaged since parked. CLEAR title in hand. Never wrecked.
100k mi on frame, engine, and most suspension.
(Original) engine needs a bottom end rebuild but has never been bored before. TH350 has ~10k on a rebuild. 3.08 diff.
Good frame with no rust of significance, body mount bolts may be a little rusty, I've never dealt with them.
Usable body. Cracks here and there but all repairable. No sign yet seen of birdcage rust. Good headlight assemblies. Good hood (no cracks, just needs repaint.)
Not much interior. Good seat frames and HVAC parts are all present.
Lots of good chassis parts as seen below. Engine fan and springs sold. Radiator trashed. Headers sold. Power steering parts good except control valve. Poly bushings on most parts with ~10k mi.
This is dirt cheap folks. The $1500 happens to be just what I need for a new block for my '70 LT-1 but more than anything I need the garage space and one less project clogging my mental space. Worth a lot more as parts (as I'd intended to sell it) but I don't have the time.
You must pick up!. Unless you can find a shipper who wants to deal with a car with no wheels (unlikely) you will need to come get it yourself. I will do all I can to help you load it.
PM for contact info, I am in San Jose near Santana Row and Santa Clara.
Tuning for Beer w/ Lars in 05
Last edited by LiveandLetDrive; 01-07-2012 at 10:37 PM.
#2
Melting Slicks
Thread Starter
ttt Could be an easy driver project for someone, just clean it up and put it back together and redo the interior (as you'd have to anyway.) Or an easy buck, just list it all for sale. Tilt/tele steering column in there btw! In fact, I'll include the second one I have lying around as well.
#4
Melting Slicks
Thread Starter
I have the interior ducting, fan housing, evaporator, and controls but no compressor, condenser, engine bay tubing, etc. Let me know if you're interested in that sort of thing. I will have to dig through some boxes to separate it out and take pictures.
Also, rocker panels were sold as well.
Also, rocker panels were sold as well.
#5
Selling the headers and the fan clutch?
If so PM or email me a price on them?
pelayo114@gmail.com
Oh and if you have rear shocks also interested in those.
If so PM or email me a price on them?
pelayo114@gmail.com
Oh and if you have rear shocks also interested in those.
#6
Melting Slicks
Thread Starter
Headers and fan (no clutch in that picture) are sold not selling. The KYB Gas-a-Just rear shocks are only ~$40 new but I'll sell them for $20+S&H if you really want them.
#9
Melting Slicks
Thread Starter
Since you said yes I guess the answer should be each! But no, that's for the pair, $40 for all four.
claysmoker PM'd, Pelayo emailed.
claysmoker PM'd, Pelayo emailed.
#11
Melting Slicks
Thread Starter
CW, I will sell it and don't mind shipping anywhere in the US as long as actual shipping is paid. I was asking $150 before but I'll take $120. It's not perfect but it's solid and in good shape. See here : http://forums.corvetteforum.com/c3-p...condition.html
Differential is sold. This thread is just turning into a parting out so I may take the time this weekend to slap a price on each thing and do it properly. Feel free to keep the requests coming in the meantime. I'll take $400 for just the body and frame, sans engine block and transmission.
Differential is sold. This thread is just turning into a parting out so I may take the time this weekend to slap a price on each thing and do it properly. Feel free to keep the requests coming in the meantime. I'll take $400 for just the body and frame, sans engine block and transmission.
#13
Drifting
#17
Melting Slicks
Thread Starter
Sorry for the delay everyone, it was a crazy week last week.
TurboSwitchCW: I can have a look at the front horns but the one in the rear (for the alarm?) was pretty corroded and I think I threw it out. I'll let you know.
Re: dash pad. It was junk so I kicked it in half and threw it out. I have very little in the way of interior, though I do have good seat frames/tracks and lots of under-dash stuff, gauges, etc. No trim or dash pads though, no seatbelts.
737373: I believe the taillights are in good shape, I'll have to dig them out tonight.
mcmsmsc: See here for the wheels and tires: http://forums.corvetteforum.com/c3-p...res-400-a.html Two good tires, two bad. I have no way of getting them dismounted any time soon which makes shipping impractical most likely.. If you're local you can certainly pick them up.
-Chris
TurboSwitchCW: I can have a look at the front horns but the one in the rear (for the alarm?) was pretty corroded and I think I threw it out. I'll let you know.
Re: dash pad. It was junk so I kicked it in half and threw it out. I have very little in the way of interior, though I do have good seat frames/tracks and lots of under-dash stuff, gauges, etc. No trim or dash pads though, no seatbelts.
737373: I believe the taillights are in good shape, I'll have to dig them out tonight.
mcmsmsc: See here for the wheels and tires: http://forums.corvetteforum.com/c3-p...res-400-a.html Two good tires, two bad. I have no way of getting them dismounted any time soon which makes shipping impractical most likely.. If you're local you can certainly pick them up.
-Chris
#18
Burning Brakes
hey man, you still around? Still selling stuff? Still have the brake calipers and fan? Driver's side trailing arm or both? (a buddy of mine had his explode)